ENGLISH
1.0 INTRODUCTION Thank you for selecting the FMM Digital Force Tester for your force measurement testing. Your FMM testing system may be used for tension and compression testing including specific test methods such as peak, break, constant hold, flexural, shear, peel, coefficient of friction and more. Your FMM testing system should be used with Starrett equipment and accessories only. And for optimum performance, your FMM testing system should be maintained and serviced annually by an authorized Starrett representative. 1.1 SYSTEM DESCRIPTION Your FMM system consists of the FMM testing frame, a DFG or DFC force gage, or the L1 tablet and software, load cell sensors and test fixtures. Together, these components provide you with a full-featured testing system for most force measurement testing applications.
1.2 SYSTEM SAFETY AND LABELING ISO and ANSI safety labels are affixed to Starrett equipment to alert users and operators of the equipment to warnings and cautions. System users should obey all warnings and cautions and should be trained on the safe operation of this equipment by an authorized Starrett representative. 1.3 CALIBRATION AND VERIFICATION Your FMM System is calibrated and tested at our factory prior to shipment to you. Our factory calibrations are traceable to national standards. If you require an ASTM E4 or ISO 7500-1 calibration, Starrett or a Starrett authorized representative can perform a calibration on-site in order to comply with these international calibration standards. Starrett recommends that you calibrate your system at least annually. More frequently calibrations may be required depending on the frequency of which the system is used. If your system is calibrated to ASTM E4 or ISO 7500-1, it must be calibrated whenever the system is relocated, e.g. moved from its location where the previous calibration occurred.
Shown: L1 System comprised of FMM-330 standard travel digital force tester with L1 Tablet and software, BLC Load Cell and test fixtures
Shown: FMM-550X extended travel digital force tester with DFC digital force gage
8 PKG08813-UMFMM
Made with FlippingBook - professional solution for displaying marketing and sales documents online