3. Insert a new battery.
Battery (CR1225) for FGA CR-HVG
Mountz Item # 982-000025
4. Install a battery cover.
Remove & insert battery
Remove screws
Maintenance Schedule Like an automobile, torque screwdrivers contain moving parts that require periodic servicing and lubrication. contain moving parts that require periodic servicing and lubrication.
Expected Tool Life With normal use – 1,000,000 operations
Routine Maintenance After 50,000 operations, strip, clean and re-grease the spring, bearings and internal components. should be replaced. Note: Any tool that is dismantled during its life must be re clean tools by immersing them in a solvent, as this will destroy the internal lubrication
grease the spring, bearings and internal components. Any worn components Any worn components
Any tool that is dismantled during its life must be re-lubricated in accordance with the Mountz recommendations. Do not solvent, as this will destroy the internal lubrication and cause the failure of the tool. lubricated in accordance with the Mountz recommendations. Do not failure of the tool.
Cleaning Regimen Please note that these tools are not designed to be submerged. Compatible Cleaning Solvents: organic cleaning solvents compatible with Nitrile. Mountz recommends Isopropyl Alcohol. Cleansing procedures involving water and isopropyl alcohol Period Between Recalibration 5,000 fastening operations. It is acknowledge time. Under these circumstances, the user may decide to increase the period between calibration intervals with the benefit of their experience. ,000 fastening operations. It is acknowledged that some tools may achieve 5,000 operations in a relatively short period of the user may decide to increase the period between calibration intervals with the benefit of ,000 operations in a relatively short period of involving water and isopropyl alcohol-based solvents are permitted.
Calibrating Torque Screwdrivers Please view the FGA calibration instructions document. FGA calibration instructions document.
Testing and Servicing Torque tools go out of calibration with use. Calibrating a torque tool is a fine tolerance. Regular torque calibration of a hand screwdriver ensures accuracy, repeatable tool performance, and adherence to international standards. We recommend a general once a year calibration interval. However, it is the user’s organization that must determine suitable intervals based upon equipment performance, application, degree of usage and management objectives. with use. Calibrating a torque tool is a fine-tuning process of bringing the tool back within its mend a general once a year calibration interval. However, it is the user’s organization that must determine suitable tuning process of bringing the tool back within its
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
3
Made with FlippingBook Annual report maker