MMD Series Product Specifications
Specification
MMD-10K Series
MMD-30K Series
MMD-50K Series
kN kgf lbf
10 1000 2250
30 3000 6750
50 5000 11,250 0.001 0.00004
Load Capacity
mm/min in/min mm/min in/min
0.001 0.00004
0.001 0.00004
Crosshead Speed - MINIMUM
1500 60 0.05 1.9
1500 60 0.025 0.9
750 30
Crosshead Speed - MAXIMUM
µm µin
0.025 0.9
Position Control Resolution
kN/mm lbf/in
72 412,844
150 855,513
161 918,367
Frame Axial Stiffness
mm in mm in mm in mm in mm in mm in
1270 50 1162 45.75 424 16.7 1626 64
1245 49 1137 44.75 424 16.7 1626 64
1220 48 1111 43.75 424 16.7 1626 64
Vertical Test Space 1
Total Crosshead Travel
Column Spacing
Total Height
787 31 736 29 136 300
787 31 736 29 192 425
787 31 736 29 225 500
Total Width
Total Depth
kg lb
Test Frame Weight
±0.5% of reading down to 1/1000 of load cell capacity. Starrett load cell sensors are supplied with a Certificate of Calibration traceable to NIST. Starrett recommends verification of load cell accuracy during installation per ASTM E4, ISO 7500-1 or EN 10002.
Load Measurement Accuracy
±0.0002 inch (±5 µm)
Position Measurement Accuracy 2 Strain Measurement Accuracy Crosshead Velocity Accuracy
±0.5% of reading down to 1/50 of full scale with ASTM E83 class B or ISO 9513 class 0.5 extensometer
±0.1% of set speed at zero or constant load hold
Data Sampling
1 to 2000Hz
12 total channels Channel 1 & 2 for Power (5-24V) Channels 3 thru 10 for either digital inputs or outputs Channels 11 & 12 for Ground
Digital I/O
Analog Inputs Analog Outputs
1 channel @ ±10V 2 channels @ 0-10V
Extensometer Ports
2 channels for independent connection to an extensometer(s)
USB Interface
1 USB 2.0 connector
Single Phase Voltage (Vac) ±10%
100-120Vac
220-240Vac
220-240Vac
220-240Vac
Maximum Power (A)
Amps
4.0
1.5
3.7
3.7
Frequency
50/60Hz
°C °F °C °F
+10 to +38 °C +50 to +100 °F -40 to +66 °C -40 to +150 °F
Operating Temperature
Storage Temperature
Humidity
10% to 90%, non-condensing
CE Compliance
MMD Series Systems meet all relevant CE standards
Notes: 1 Total vertical space is the distance from the top surface of the base plate to the bottom surface of the crosshead, excluding load cell sensor, test fixtures, and clevis adapter.
2 Assumes Linear Error Correction and Deflection Compensation have been performed on test frame.
12
Made with FlippingBook - professional solution for displaying marketing and sales documents online