3.2 Unpacking Your System Starrett recommends that you wait to unpack your MMD or FMD Series once it has been located in its final site location. Your MMD and FMD Series should be moved using a forklift or crane to its final site location. Starrett uses environmentally safe portable crating systems to trans- port the MMD or FMD Series. These systems are reusable, so take care to store them flat when you are finished removing your test frame. Disassemble your packaging create as follows: 1. Remove the metal clips holding the top plate of the crate system. 2. Remove the wooden top plate. 3. Remove the metal side clips. 4. Remove one of the metal base clips. 5. Remove the wooden side where you removed the metal base clip. 6. Repeat steps 3-5 as your work around each side of the crate system. 7. Remove the shrink wrap vapor barrier around the test frame. DO NOT USE A KNIFE. Take care not to cut the shrink wrap as you may accidentally damage the surface finish. 8. Review the Packing List to ensure all components have been shipped. Contact Starrett if you find any accessories or compo- nents missing. 9. Remove all accessories and components from the base and save to a side location. Do NOT disassemble or remove any compo- nents or parts from the Accessory packages. Retain all packaging materials until the system is satisfactorily installed and all parts, components and accessories are accounted for and located. 10. Prepare to move the MMD or FMD test frame to its final site location.
WARNING When removing the wooden sides from the crate system, you should work with the help of an assistant to keep the oppos- ing sides from falling off the bottom skid. Once the top and sides of the crate system have been removed, leave the MMD or FMD test frame in the base on the skid. The skid is required if you choose to life the frame under the base.
Starrett Crate Tool
Starrett Crate System
20
Made with FlippingBook - professional solution for displaying marketing and sales documents online