4.3 Site Considerations It is important that you make proper site preparations before moving the MMD or FMD Series to its final site location. This will ensure that the equipment operates in accordance to its specifications. Please adhere to the following when locating your MMD or FMD Series test frame: Location The MMD or FMD Series test frame must be located so that there is proper air ventilation around the entire frame. The test frame must NOT be located directly against a wall or where other equipment or ob- jects can interfere with air circulation or the ability of your personnel to reach all safety related facilities including the emergency stop, power switch, stop/start button, power cord and travel limits. Bench top Positioning Starrett recommends that your MMD or FMD Series be mounted on a Starrett test bench. If a non-Starrett approved bench is used, you must verify that the bench is able to support the weight of the test frame with all of its components and accessories, including computer workstation, testing fixtures, tools, etc. Your bench should have level- ing feet. The location of the bench must be free of vibrations coming from adjacent equipment of activities taking place within or near the site location. Ceiling Clearance Ensure that there is adequate ceiling clearance for your MMD or FMD Series test frame. Also, take into consideration the ceiling clearance required for lifting and positioning the test frame on to your bench top. Power Supply The power source should allow for directly plugging the power cord from the test frame to the outlet. The outlet and power cord must be located so that the cord can quickly and easily be unplugged in the event of an emergency.
CAUTION Your MMD Series requires “clean” and stable electrical power. Power fluctuations and surges may cause perfor- mance problems that may lead to extensive damage to your test frame. NOTE An in-line power surge protector is recommended for all installations. HAZARD NEVER use an extension cord or power strip for connecting power to your MMD or FMD Series. The power cord to the MMD or FMD Series should be plugged directly into an outlet to supply the correct power input. CAUTION ALWAYS make sure that personnel have quick and immedi- ate access to the power cord for your MMD or FMD Series test frame. Personnel must be able to unplug the power cord quickly in the event of an emergency. Environmental Conditions The MMD and FMD Series are considered laboratory instruments and are designed for use under normal laboratory conditions. They should be located in a temperature-controlled environment that is free of dirt, debris, oils, etc. Protective measures may be required if excessive dust, fumes, electromagnetic interference or hazardous conditions exist. Contact Starrett for assistance.
starrett.com
25
Made with FlippingBook - professional solution for displaying marketing and sales documents online