4.4.1 Verifying Your Input Power Source You must verify your input power to your MMD or FMD Series BEFORE connecting the machine to the power source. The machine’s voltage and power plug are set at the factory according to the supply power indicated on the original purchase order. The Data Tag for your test frame will identify the Input Power that is configured for your system. If the input power source differs from the Data Tag information on your machine, you must setup the machine using the following procedure: CAUTION Make sure you use a 3-wire , grounded mains power cable between the source power outlet and the MMD or FMD Series frame. NOTE The connector on the power cable must be compatible with your power source. If the power cable supplied with your MMD or FMD Series does not fit the power source outlet, add a new male connector to the cable that is compatible to the voltage and wire in accordance to CEE wire code:
Wire Color
Function
Brown
High Low Earth
Live
Light Blue
Neutral Ground
Green and Yellow
Connector Wire Scheme
starrett.com
27
Made with FlippingBook - professional solution for displaying marketing and sales documents online