4.5.2 Installing the L2 Tablet Starrett L2 Series software for force measurement operates on tablet computer called the L2 Controller. L2 Series software features a Windows operating system and is designed specifically for force measurement applications in the laboratory or on the production floor. The tablet computer is connected to the USB connector located on the back of the MMD or FMD Series. For more information about our L2 Series software, please read the associated User’s Manual. The L2 Controller attaches to the MMD or FMD Series column. The column is fitted with a ball joint. The L2 Controller attaches to a plate with a ball joint. An adjustable RAM arm attaches to both ball joints. The RAM arm lets you position the L2 Controller for maximum comfort and easy operation. Attach the L2 Controller as follows: 1. Connect the ball joint to either side of your MMD or FMD Series by sliding the ball joint into one of the slots. 2. Position the ball joint at your desired height and tighten the top and bottom screws to secure the ball joint inside the slot. Be careful not to OVER-TIGHTEN the ball joint to the slot. 3. Fit the table computer onto the base plate and secure the tablet using the special, tamper-resistance screws. 4. Attach the ball joint arm to the ball joint on the column. 5. Attach the table to the ball joint arm. 6. Use the manual adjustment screw to tighten the tablet at the angle that is desirable for safe operation. 7. Connect the tablet computer to the MMD or FMD Series test frame using the supplied USB 2.0 cable. Connect the cable to the tablet and to the MMD or FMD Series test frame’s USB connector.
Install Ball Joint
Fix spring clip onto both balls and tighten
30
Made with FlippingBook - professional solution for displaying marketing and sales documents online