5.2.2 Mains Power Switch The main power switch for your MMD or FMD Series frame is located on the back of the machine. WARNING ALWAYS make sure the power switch is in the OFF position before plugging the test frame into a power source. 1. Connect the machine to a source power outlet. 2. Turn the On/Off switch to the ON position to operate. 3. When your machine is not being used, turn the power switch to the OFF position.
5.2.3 Crosshead Jog Switch The Jog Switch lets you manually move the crosshead UP and DOWN. When using the Jog Switch, pressing the switch cause the crosshead velocity to increase from zero to full velocity in about 3 seconds. You may restrict the maximum velocity using the L3 Series software Motion Setting.
JOG UP - press the up portion of the switch to cause the crosshead to move upward. Release the switch to stop motion.
JOG DOWN - press the down portion of the switch to cause the crosshead to move downward. Release the switch to stop motion
Mains Power On/Off Switch
Press Jog Switch Down
starrett.com
39
Made with FlippingBook - professional solution for displaying marketing and sales documents online