6.1.2 Setting Crosshead Maximum Velocity Using Lx Series software, you may adjust the maximum crosshead travel velocity. The minimum velocity is factory set at 0.001mm/min (0.00004 in/min). The crosshead will move at the minimum speed when the test frame is not connected to your Lx Series workstation to prevent accidental overload conditions.
Your MMD and FMD Series can operate at its specified full velocity at full load.
You can reduce full velocity as follows:
1. With your Lx Series software, access the Main Settings menu by selecting the Lx symbol. 2. Select the Settings symbol. 3. Select the Motion setting. 4. Adjust the Max Velocity setting to your desired highest velocity. 5. Select Done.
Set Crosshead Maximum Velocity as follows:
1. Select Lx Symbol for Main Settings Menu 2. Select MOTION setting 3. Enter value for the maximum allowed crosshead velocity you prefer 4. Select DONE
NOTE The factory default setting is the maximum allowed velocity for your system.
Maximum Crosshead Velocity
Model
mm/min
in/min
MMD-10K, FMD-10K MMD-30K, FMD-30K MMD-50K, FMD-50K
1524 1524
60 60 30
762
Maximum Crosshead Velocities
starrett.com
43
Made with FlippingBook - professional solution for displaying marketing and sales documents online