WPS max Index
Manual zero point clamping system for workpiece direct clamping ■ Single quick-actuation for the rapid opening and closing ■ 3 clamping slides
0
Workpiece positioning system
Application / customer benefits • Huge reduction of set-up times for highest efficiency • Safe workpiece clamping with maximum pull down and holding forces, highest repeatability • Ideal for 5-axis machining • Single quick-actuation for the rapid opening and closing of the modules with only 3.5 rotations • Flexible configurations for customized use • Interchangeable to the proven zero point system APS-140 • Anti rotating protection Technical features • Pull-down force 25 kN • Max. torque 15 Nm • Repeatability < 0.005 mm • Holding force 50 / 75 kN (M12 / M16) depending on thread of clamping pin • 3 clamping slides for maximum hold while clamping
• Solid drive system with hardened components • proofline® = fully sealed – low maintenance Standard equipment • WPS max with mounting bolt M16 (except 080-040)
s
a l e
m a i
Ø80
WPS max 080-060 - 080-200 Index
WPS 080-040 Index
Ø80
Ø80
Ø80
Ø80
Ø80
Ø80
Ø80
Ø D
Ø D
Ø D
Ø D
Ø D
Ø D
Ø D
B
Ø D
Ø D
Ø D
Ø D
B Ø D
Ø D
Ø D
B 1
B 1
Ø D
B
Ø D
B
B 1
B 1
36.5
36.5 36.5 48.5 48.5
48.5 36.5
48.5
Subject to technical changes.
Technical data SMW-AUTOBLOK Type WPS max Index / Id.No. A B B1 C D / Depth H
080-040 467660
080-060 467662
080-080 467664
080-100 467666
080-120 467668
080-160 467670
080-200 467672
90
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
172
141.4
17
Ø 25H6 Ø 25H6 / 5.5 40 ± 0.005 60 ± 0.005 80 ± 0.005 100 ± 0.005 120 ± 0.005 160 ± 0.005 200 ± 0.005 19.5 21 25 45 65 105 145 - 6 25 < 0.005 25* / 50* 40** / 75**
H1 H2
Pull-down force (kN) Repeatability (mm) Holding force M12 (kN) Holding force M16 (kN)
* Holding force for ISO 4762 M10x45 - 12.9 / Holding force for ISO 4762 M12 - 12.9 (see clamping pins) ** Holding force for ISO 10642 M12x55 - 10.9 / Holding force for ISO 4762 M16 - 12.9 (see clamping pins)
SMW-AUTOBLOK 101
Made with FlippingBook Publishing Software