WPS max
Accessories ■ Spacer ■ Slide hammer ■ Positioning set
Workpiece positioning system
Spacers for WPS modules
Application example
Attention: Standard mounting screw can not be used anymore. Please check for correct thread engagement.
Ø25 H6 Ø18
WPS max 40
323,5 269,5
4
Ø25 H6
Spacer
Id. No.
H
H1
460224
10
-
20
460225
15
4
70
460226
20
9
Tuning disk
460227
25
14
15
Adaptation ring
460236
45
34
Subject to technical changes.
Slide hammer (puller) for adapters and clamping pins
300
323,5 269,5
M14x1,5 ANSCHLUSS 460253 Connection
M18x1,5 ANSCHLUSS 460254 Connection
4
3
20
20
70
15
15
Standard equipment: Extractor and Connection (M14x1,5 und M18x1,5)
300
Subject to technical changes.
M14x1,5 ANSCHLUSS 460253
M18x1,5 ANSCHLUSS 460254
Slide hammer with thread M10 and M12
460250 Id. No
for adapter and clamping pins
Id. No
Connection
460253
M14 x1.5
M10
for for for for
460254
M18 x1.5
M12
467689
M24 x1.5
M12
467690
M28 x1.5
M12
Positioning set for WPS max 080
Standard equiment: pin, O-ring and clamping pin
Ø 16
Pin
Note: Compatible with all common tool holders. Positioning of the module ± 0.03 (depending on tool holder). The WPS modules may be actuated with max. 2 Nm (instead of 15 Nm) in conjunction with the positioning set, otherwise there is a risk of damage!
O-ring
Positioning set for WPS max 080
Ø 39.3
Clamping pin
Id. No.
460248
Subject to technical changes.
108 SMW-AUTOBLOK
Made with FlippingBook Publishing Software