WPS XL
Manual zero point clamping system for workpiece direct clamping ■ Single quick-actuation for the rapid opening and closing ■ 3 clamping slides Application/customer benefits • Huge reduction of set-up times for highest efficiency • Safe workpiece clamping with maximum holding forces and highest repeatability • Ideal for 5-axis machining • Single quick-actuation for the rapid opening and closing of the modules with only 3 rotations • Flexible configurations for customized use Technical features
Workpiece positioning system
• Pull-down force 40 kN • Holding force 100 kN** • Max. torque 30 Nm • Repeatability < 0.01 mm • Solid drive system with hardened components • 3 clamping slides for maximum hold while clamping • proofline® = fully sealed - low maintenance Standardequiment WPS XL with mounting screw M24 (except WPS XL 60)
s
a l e
m a i
WPS XL 100, 140, 200
WPS XL 60
Ø 140
Ø 140
ØD
ØD
ØD
ØD
B
B1
E
Subject to technical changes.
Technical data SMW-AUTOBLOK Type
WPS XL-60
WPS XL-100
WPS XL-140
WPS XL-200
467600
467602
467604
467606
A B B1 C D / Depth E F H
154 280 212
- - - -
- - - -
- - - -
26
Ø 40 H6 / 6,5
200 100
- -
- -
- -
60 42
100
140
200
H1 H2 H3
19 14
19 14
34 14
-
27,5
-
-
-
Pull-down force (kN) Repeatability (mm)
40 < 0.01 50* / 75* 100 **
Holding force (kN) Clamping bolt M12 / M16 Holding force (kN) Clamping bolt M20 / M24 Weight
12.0
10.5
14.5
21.3
* Holding force for ISO 4762 M12x60 - 12.9 / Holding force for ISO 4762 M16 - 12.9 (see clamping pins) ** Holding force for ISO 4762 M20x70 - 12.9 - Holding force for ISO 4762 M24 - 12.9 (see clamping pins)
118 SMW-AUTOBLOK
Made with FlippingBook Publishing Software