ZeroAct
Clamping module
■ Connectable flexible zero point clamping module ■ Fully sealed
Manual zero point module
Application/customer benefits • Up to 3 ZeroAct modules can be connected in a row with central actuation • Single quick-actuation for the rapid opening and closing of the modules with only 270° rotation • Extremely flat design • Huge reduction of set-up times for highest efficiency • Safe workpiece clamping with maximum holding forces and highest repeatability • Flexible configurations for customized use • 4 indexing slots • Interchangeable to the proven zero point systems APS / WPS Technical features • Dimensions 150 x 150 mm, height 40 mm • Pull-down force 15 kN • Max. torque 15 Nm • Repeatability < 0.005 mm • Holding force 35 / 50 / 75 kN (M12 / M16) depending on thread of clamping pin • 2 clamping slides for maximum hold while clamping • proofline® = fully sealed - low maintenance Standard equiment • ZeroAct with 6 x mounting screw M12 x 50
s
a l e
m a i
6xØ12 H7
Ø14 H7
6xØ12 H7 Ø14 H7
6xØ12 H7
Ø14 H7
150 100 130
150 100 130
150 100 130
±0.01
±0.01
±0.01
±0.01
±0.01
±0.01
36
36
36
15 x 45°
15 x 45°
15 x 45°
12
12
12
Connecting pin*: Connecting up to 3 modules
*Not included!
Subject to technical changes.
Technical data SMW-AUTOBLOK Type Id. No. Pull-in force Repeatability
ZeroAct 460450
15
kN
< 0.005
mm
35 50 75
kN kN kN
Holding force M10 Holding force M12 Holding force M16
124 SMW-AUTOBLOK
Made with FlippingBook Publishing Software