Pneumatic valve
Pneumatic jaw stroke control valve
(OPTIONAL)
Available for STV-2 STV-3 PTP PTH
The pneumatic open / close stroke control valve signals the locking jaws end-of- stroke positions , both in fully opened and fully closed positions. The valve needs a pneumatic line with filtered and lubricated air and a pressure of 0.5 - 1 bar . • When the locking jaws are in one of the end stroke position (fully opened or closed), the valve is open causing a pressure drop in the pneumatic line or the beginning of an air flow. • When the locking jaws are in the working stroke, the valve is closed and there is no pressure drop in the pneumatic line and there no air flow. ONLY THE PTP AND PTH VISES The vises can be supplied (when requested) with the opposite functioning of the valve: that is closed valve at the end of the strokes and open in the working / middle stroke.
Twin Vise type
Id. No.
3
125 STV-2 180 STV-2 225 STV-2 180 STV-3 225 STV-3
90902283 90902283 90902283 97901801 97902204 90901163 90901763 90901763 90901763 90901763
100 PTP PTH 125 PTP PTH 160 PTP PTH 200 PTP PTH
250 PTH
SAB-1
SAFETY VALVE
(OPTIONAL)
1
2
SAB-1 Valve STANDARD Id. No. 27581810 – weight 0,150 kg
1
The Safety valve SAB-1 maintains air pressure in the cylinder pallet transportation / storage or machining without feed.
SAB-1 Valve visual check OPTIONAL Id. No. 27581815 – weight 0,150 kg
2
The 27581815 is different from 27581810 for the red visual pin. This system permits to see when the valve is activated.
ONLY FOR STV-2 STV-3
Pneumatic gun
WITH STEEL NOZZLE
Pneumatic gun Id. No. 41702140
SMW-AUTOBLOK 221
Made with FlippingBook Publishing Software