SinterGrip
Clamping inserts
■ Low clamping depth ■ High stability and active vibration absorption
Application/customer benefits • Very low clamping depth (only 3.5 mm) ensures safe clamping of the workpieces: Highest efficiency and productivity resulting in lower material costs and less machining costs • No pre-marking necessary: Eliminates costs for a pre-mark machine and set-up times
0,3 • Highest stability and active vibration absorption • Pull-down effect due to the special row of the teeth • Increases cutting speeds compared to other systems • Simple manufacturing of jaws for SinterGrip inserts by the customer • Maximum lifetime Technical features • Clamping depth only 3.5 mm • 3 different versions for steel, hardened steel / titanium (up to 54 HRC) and aluminum / plastic • Made from coated carbide steel 1,7 10,77 70° 5°
40°30°
5°
5°
5°
70°
70°
40°30°
1,8 2,86
1,7 10,77
70°
90°
40°30°
40°30°
2,05
10,74
10,87
0,24
0,3
0,5
1,74
SinterGrip STD
SinterGrip HRC
SinterGrip ALU
5° Clamping insert for steel
Clamping insert for hardened steel and titanium until 54 HRC
Clamping insert for aluminum and plastic
Id. No. 58450119
Id. No. 58450129
Id. No. 58450139
90°
40°30°
2,05
10,87
0,5
Order review
Type
Id. No.
SinterGrip STD
58450119
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
Type
Id. No.
SinterGrip HRC
58450129
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
Type
Id. No.
SinterGrip ALU
58450139
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
302 SMW-AUTOBLOK
Made with FlippingBook Publishing Software