SinterGrip
Manufacturing of jaws for SinterGrip inserts by the customer ■ Milling cutter for SinterGrip clamping inserts ■ Manual
SinterGrip milling cutting tool
Type
Id. No.
SinterGrip milling cutter
58450410
Solid carbide end milling cutting tool, Ø 4 mm, 3 cutting edges, Ø 3x5°, V = 40-60 m/min, Fz = 0.01-0.04 mm/tooth.
Drawing for the pocket to include SinterGrip clamping inserts: Recommended cutting parameters: Cutting speed V = 80-120 m/min Feed force per tooth FZ = 0.02 mm
A-A
A
A
60°
Subject to technical changes.
Tutorial for the preparation of jaws for SinterGrip inserts by the customer
1
Shape of the SinterGrip pocket manufactured with SinterGrip milling cutting tool (Id. No. 58450410)
1
2
Clamping step 3.5 x 4 mm
2
3
Jaw made from nitrided steel with a tensile strength of ≈ 980N/mm 2
3
Measurement of the dimensions of the vise
Milling of the jaw to the required height
Drilling of the jaw with the correct distance of the holes
Mounting of the jaw on the vise
304 SMW-AUTOBLOK
Made with FlippingBook Publishing Software