SinterGrip
Clamping inserts
■ Low clamping depth ■ High stability and active vibration absorption
0,3 • Highest stability and active vibration absorption • Pull-down effect due to the special row of the teeth • Increases cutting speeds compared to other systems • Simple manufacturing of jaws for SinterGrip inserts by the customer • Maximum lifetime Technical features • Clamping depth only 3.5 mm • 4 different versions for steel, hardened steel / titanium (up to 54 HRC), 1,7 10,77 70° 5° Application / customer benefits • Very low clamping depth (only 3.5 mm) ensures safe clamping of the workpieces: highest efficiency and productivity resulting in lower material costs and less machining costs • No pre-marking necessary: Eliminates costs for a pre-mark machine and set-up times 40°30°
aluminum / plastic and polymers • Made from coated carbide steel
SinterGrip STD Clamping insert for steel Id. No. 58450119
SinterGrip HRC Clamping insert for hardened steel and titanium until 54 HRC Id. No. 58450129
5°
5°
1,7 10,77
70°
90°
40°30°
40°30°
2,05
10,87
0,3
0,5
SinterGrip ALU Clamping insert for aluminum and plastic Id. No. 58450139
SinterGrip PLM Clamping insert for polymers Id. No. 58450149
5°
A-A
5°
A
55°
70°
A
2,57
70°
11,72
40° 30°
1,8 2,86
10,74
0,24
90°
40°30°
2,05
1,74
10,87
0,5
Order review
Type
Id. No.
Type
Id. No.
SinterGrip HRC
58450129
SinterGrip STD
58450119
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
Type
Id. No.
Type
Id. No.
SinterGrip ALU
58450139
SinterGrip PLM
58450149
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
Consisting of 10 pcs. clamping inserts (without bolts; Order no. SinterGrip bolt-set 58450219 )
310 SMW-AUTOBLOK
Made with FlippingBook Publishing Software