Fast changeover, fast payback: The original quick jaw change manual chuck
HG-NB
EXTRA LARGE THROUGH-HOLE
► ALL EXISTING TOP JAWS CAN BE USED
Chuck takes same jaws as KNCS-NB / NBX
■ Jaw change in less than 1 minute
Flat gripping force curve for highest speeds
300
250
HG-NB-800
200
HG-NB-1000
150
100
F G
50
F
■ Universal, because jaws can be radially adjusted and reversed = less jaw sets
0
100 200 300 400 500 600 700 800 900 1000
Speed (r.p.m.)
■ The max. gripping force is the total, acting on the 3 jaws, obtained by applying to the chuck the max. allowed driving torque. The data refers to a chuck newly maintained accordingly to their service manual, using SMW K05 grease. ■ The dynamic gripping forces have been measured using hardened standard stepped monoblock jaws placed in a position not exceeding the outer diameter of the chuck. Safety advice / danger of damage: When using taller / havier jaws and / or clamping on a more external position reduce driving torque / rotating speed accordingly.
Jaws radially adjustable
Jaws 180° reversed
316 SMW-AUTOBLOK
Made with FlippingBook Publishing Software