CENTCO 4-MLW 4-JAW MANUAL CHUCK
In the beginning the jaw pairs Z1 and Z2 only apply a cente- ring force that is necessary to center the workpiece. Only if both jaw pairs Z1 and Z2 are in contact with the workpiece, the clamping force necessary for machining is applied.
z1
Weight-optimised chuck body with recesses for best accessibility
z2
z2
z1
2+2 self centering + compensating clamping
thin-walled,
of round,
iregular shaped and
square / rectangular workpieces
Examples for workpieces
POSSIBLE COST SAVINGS calculation example 3-jaw chuck standard jaw chuck €/set
Centco4-MLW
€/set
1x Special jaws
1.500,-€ 1x Standard jaws
500,-€
1x Standard jaws
375,-€ 1x Standard jaws
500,-€
1x Special jaws
1.750,-€ 1x Standard jaws
500,-€
1x Special jaws
2.000,-€ 1x Standard jaws
500,-€
Total at 1 set of jaws respectively
Total at 1 set of jaws respectively
5.625,-€
2000,-€
Actuation by central drive
Cost savings at 1 set of jaws
Cost savings at 1 set of jaws
0 €
3.625,-€
336 SMW-AUTOBLOK
Made with FlippingBook Publishing Software