Centco4-MLW-D
4-jaw manual chuck
Application/customer benefits • Independent self centering clamping in 2 axis via 1 central, manual actuating mechanism • Mechanical centering of the workpiece • Clamping of every workpiece geometry possible • Weight-optimized chuck body • Less workpiece deformation compared to 3-jaw chucks • Long lifetime due to case hardened parts ■ 2 +2 self centering ■ Independent self centering clamping in 2 axis ■ Weight-optimized chuck body
INCH SERRATION
• Large range of standard top jaws • Suitable for OD and ID clamping • Fixed jaw for stationary processing Technical features • Centrifugal force compensation • Optimized lubrication system
Standard equipment
Ordering example Centco4-MLW-D-600-4
4-jaw manual chuck, 8 pieces T-nuts and bolts Actuation wrench
Function / Application examples 2+2 self centering and compensating clamping* In the beginning the jaw pairs Z1 + Z2 only apply a centering force that is ne- cessary to center the workpiece. Only if both jaw pairs Z1 and Z2 are in contact with the workpiece, the clamping force necessary for machining is applied.
2+2 self centering clamping of round or thin-walled workpieces
Z1
Z2
Z2
Z1
2+2 self centering and compensating clamping of rectangular or square workpieces
2+2 self centering and compensating clamping of unshaped workpieces
* Z1 : Self centering clamping axis 1 / Z2 : self centering clamping axis 2 Z1 is compensating to Z2
338 SMW-AUTOBLOK
Made with FlippingBook Publishing Software