WPS max
Manual zero point clamping system for workpiece direct clamping ■ Single quick-actuation for the rapid opening and closing ■ 3 clamping slides Application/customer benefits • Huge reduction of set-up times for highest efficiency • Safe workpiece clamping with maximum pull down and holding forces, highest repeatability • Ideal for 5-axis machining • Single quick-actuation for the rapid opening and closing of the modules with only 3.5 rotations • Flexible configurations for customized use • Interchangeable to the proven zero point system APS-140 Technical features • Pull-down force 25 kN • Max. torque 15 Nm • Repeatability < 0.005 mm • Holding force 50 / 75 kN (M12 / M16) depending on thread of clamping pin • 3 clamping slides for maximum hold while clamping
Workpiece positioning system
• Solid drive system with hardened components • proofline® = fully sealed - low maintenance Standard equipment • WPS max with mounting bolt M16 (except 080-040)
s
a l e
m a i
WPS max 080-040
WPS max 080-060, 080-080, 080-100, 080-120, 080-160 Ø 80 Ø 80
Ø 80
Ø 80
Ø 80 Ø 80
Ø 80
Ø 80
ØD ØD
ØD ØD
ØD ØD
ØD
ØD
ØD
ØD ØD
ØD
ØD
ØD
ØD
B
B
B
ØD
B1 B1
B
B1
B1
Subject to technical changes.
Technical data SMW-AUTOBLOK Type WPS max / Id. No. A B B1 C D / Depth H
080-040 467450
080-060 467452
080-080 467454
080-100 467456
080-120 467458
080-160 467460
90
- - - -
- - - -
- - - -
- - - -
- - - -
172
141.4
17
Ø 25H6
Ø 25H6 / 5.5 60 ± 0.005
Ø 25H6 / 5.5 80 ± 0.005
Ø 25H6 / 5.5 100 ± 0.005
Ø 25H6 / 5.5 120 ± 0.005
Ø 25H6 / 5.5 160 ± 0.005
40 ± 0.005
25.5
21
25
45
65
105
H1 H2
-
6
6
6
6
6
25
25
25
25
25
25
Pull-down force (kN) Repeatability (mm) Holding force M12 (kN) Holding force M16 (kN)
< 0.005
< 0.005
< 0.005
< 0.005
< 0.005
< 0.005
25* / 50*
25* / 50*
25* / 50*
25* / 50*
25* / 50*
25* / 50*
40** / 75**
40** / 75**
40** / 75**
40** / 75**
40** / 75**
40** / 75**
* Holding force for ISO 4762 M10x45 - 12.9 / Holding force for ISO 4762 M12 - 12.9 (see clamping pins) ** Holding force for ISO 10642 M12x55 - 10.9 / Holding force for ISO 4762 M16 - 12.9 (see clamping pins)
98 SMW-AUTOBLOK
Made with FlippingBook Publishing Software