Wire Rope Terminations Hand spliced or machine swaged slings, with your choice of terminations, can be manufactured and tested (if required) on our premises at short notice. All slings and assemblies are permanently marked with safe working loads, based on a 5:1 factor of safety. Machine Swaging Aluminium Ferrules Sizes 2mm – 52mm. Copper Ferrules Sizes 2mm – 10mm Steel Ferrules Sizes 9mm – 75mm Swage Sockets Sizes 3mm – 52mm Hand Splicing from 2mm – 75mm dia
Typical Steel Wire Rope Description 13 mm 6/36 G1770 RHOL WRC PREF G2 - 200 mm soft eye each end
- Machine spliced WLL 2.1 Tonne
- 3.0 metres effective length
(a) 13mm
Diameter, measured over crowns.
(b) 6/36
Construction (six strands, each with thirty six wires).
(c) G1770
G signifies "galvanised" wires. 1770 signifies tensile grade of wires (in Megapascals).
(d) RHOL
Right Hand Ordinary Lay (strands laid up to the RIGHT, wires in each strand to the LEFT).
(e) WRC
Wire Rope Core (approx 7.5% stronger and 11% heavier than FC).
(f) PREF
Strands shaped (helix formed) before laying up into a rope.
(g) G2
Lubricant (Petroleum Jelly).
(h) 200mm
Eye size.
(i) Machine Splice Steel, copper or aluminium alloy ferrule pressed around the looped end of wire rope.
(j) WLL
Maximum load that can be lifted on a particular service.
(k) Length
In metres, measured from bearing points of eyes.
10 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577
CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 11
Made with FlippingBook - Online Brochure Maker