WIRE ROPE SLINGS
POWERFORM® 6/6P • A high strength rugged six strand rope ideal for situations where longer service life is required • Can be substituted for any six strand construction to improve service life • High fatigue life due to unique compaction process • A sample of rope from each production batch is tested to destruction
• Maximum resistance to crushing. Recommended for multi-layer spooling operations
• Increased abrasion resistance
• Fully lubricated in manufacturing
Typical Steel Wire Rope Sling Description Hand spliced or machine swaged slings, with your choice of terminations, can be manufactured and tested (if required) on our premises at short notice. All slings and assemblies are permanently marked with safe working loads, based on a 5:1 factor of safety.
• Optional plastic impregnation (P) signifies full plastic impregnation of the steel core.
Container
13 mm 6/36 G1770 RHOL WRC PREF G2 • 200 mm soft eye each end
• Machine spliced WLL 2.1 Tonne
Nom. Rope Dia.
Nom. Rope Dia.
Approx. Mass
Minimum Breaking Force Galvanised & Ungalvanised Rope Grade
• 3.0 metres effective length
Lattice Room
2160 N/mm 2
1960 N/mm 2
(mm)
(in)
(kg/100m) (kN)
(tonnes)
(kN) 85.7 98.6
(tonnes)
(a) SWR
Steel Wire Rope.
10 11 12 13 14 15 16 17 18 19 20 22 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 24
46.4 56.1 66.8 74.8 78.4 90.9
69.5 83.8
7.1 8.5
8.7
(b) FC
Fibre Core.
10.1 11.6 14.3 15.0 17.3 19.9 22.2 25.1 28.1 31.0 34.1 40.8 41.6 49.8 56.3 58.9 67.0 77.2 86.2 93.4
100.0 113.0 118.0 137.0 157.0 178.0 201.0 225.0 251.0 278.0 336.0 343.0 400.0 449.0 470.0 545.0 626.0 712.0 804.0 901.0
10.2 11.5 12.0 14.0 16.0 18.1 20.5 22.9 25.6 28.3 34.3 35.0 40.8 45.8 47.9 55.6 63.8 72.6 82.0 91.8
114.0 140.0 147.0 170.0 195.0 218.0 246.0 276.0 304.0 335.0 400.0 408.0 489.0 552.0 578.0 657.0 757.0 846.0 916.0
(c) 13mm
Diameter (nominal) of SWR measured over “crowns”.
½
(d) 6/36
Construction (six strands, each with thirty six wires).
Dockside
(e) G1770
“G” signifies "galvanised" wires. 1770 signifies tensile grade of wires (in Megapascals).
104.0 119.0 134.0 150.0 168.0 186.0 225.0 229.0 267.0 299.0 314.0 364.0 418.0 475.0 518.0 581.0 647.0 717.0 790.0 867.0 948.0
5 ⁄ 8
(f) RHOL
Right Hand Ordinary Lay (strands laid up to the RIGHT, wires in each strand to the LEFT).
(g) WRC
Wire Rope Core (approx 7.5% stronger and 11% heavier than FC).
¾
(h) PREF
Strands shaped (helix formed) before laying up into a rope.
Steelworks Ladle
(i) G2
Lubricant (Petroleum Jelly).
7 ⁄ 8
(j) 200mm
Eye size.
1
(k) Machine Splice Steel, copper or aluminium alloy ferrule pressed around the looped end of wire rope.
(l) WLL
Maximum load that can be lifted on a particular service.
Offshore Pedestal
(m) Length
For restrictions refer to AS 1666-1995.
1-¼
1065.0 109.0 1165.0 119.0 1295.0 132.0 1425.0 145.0 1505.0 153.0 1665.0 170.0 1885.0 192.0 1975.0 201.0 2135.0 218.0 2325.0 237.0 2475.0 252.0 2650.0 270.0 2810.0 286.0
Machine Swaging Aluminium Ferrules Sizes 2mm – 52mm Copper Ferrules Sizes 2mm – 10mm Steel Ferrules Sizes 9mm – 75mm Swage Sockets Sizes 3mm – 52mm Hand Splicing from 2mm – 75mm dia
1-½
1004.0 102.0 1112.0 113.0 1226.0 125.0 1246.0 127.0 1362.0 139.0 1483.0 151.0 1609.0 164.0 1741.0 177.0 1877.0 191.0 2019.0 206.0 2166.0 221.0 2317.0 236.0
Unloader
1032.0 1120.0 1211.0 1306.0 1405.0 1507.0 1613.0
Endless Slings
Boom Hoist
Main Hoist
*Mass per unit length of POWERFORM 6P increases by approx. 3%. Note: • POWERFORM 6P is available only for 16mm and above on special request and prior confirmation. • Rope sizes and Breaking Force not shown in the standard table, may be available on request and prior confirmation.
Racking/Trolley
Butt Splice
Grommet
* For higher lifting heights, a rotation resistant rope should be selected.
Machine Swaged
22 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577
CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 23
Made with FlippingBook - Online Brochure Maker