Finesse
Produced with Rainbloc ® See page 44 for more info.
Nueva ® Collection
FINESSE SIZES (D X H X L)
Metric Norman 90 x 57 x 290 mm (3 1/2 x 2 1/4 x 11 1/2”) Courses out with Metric Brick and Block
Premier Plus 90 x 79 x 257 mm (3 1/2 x 3 1/8 x 10 1/8”) Courses out with Artiste 2
90 x 290 Stone 90 x 90 x 290 mm (3 1/2 x 3 1/2 x 11 3/8”) Courses out with Metric Brick and Block
90 x 390 Stone 90 x 90 x 390 mm (3 1/2 x 3 1/2 x 15 3/8”) Courses out with Metric Brick and Block
90 x 590 Stone 90 x 90 x 590 mm (3 1/2 x 3 1/2 x 23 1/4”) Courses out with Metric Brick and Block
190 x 390 Stone 90 x 190 x 390 mm (3 1/2 x 7 1/2 x 15 3/8”) Courses out with Metric Brick and Block
168 x 590 Stone 90 x 168 x 590 mm (3 1/2 x 6 5/8 x 23 1/4”) Courses out with Premier Plus and Artiste 2
190 x 590 Stone 90 x 190 x 590 mm (3 1/2 x 7 1/2 x 23 1/4”) Courses out with Metric Brick and Block
FINESSE SILLS
The 168 and 257 mm height stones course out with Premier Plus brick and our Artiste 2 stone.
290 x 590 Stone 90 x 290 x 590 mm (3 1/2 x 11 3/8 x 23 1/4”) Courses out with Metric Brick and Block
257 x 590 Stone 90 x 257 x 590 mm (3 1/2 x 10 1/8 x 23 1/4”) Courses out with Premier Plus and Artiste 2
Corner Stone 90 x 190 x 190 x 390 mm (3 1/2 x 7 1/2 x 7 1/2 x 15 3/8”)
Finesse 590 Sill with Drip Edge 190 x 90 x 590 mm (7 1/2 x 3 1/2 x 23 1/4”)
Note: 1. C oncrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the block unit and of the masonry construction should be reviewed and verified. 2. C oncrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the NCMA TEK 10 series on movement control. 3. T o ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices. 4. B rampton Brick Limited is not design responsible.
Typical Brampton Brick Range
Physical Property
CSA
ASTM
Metric Units
Imperial Units
Individual Average of 3 Specified Individual Average of 3
- - > 25 MPa
> 3000 psi > 3500 psi - < 12 lb/ft 3 < 10 lb/ft 3
Minimum Compressive Strength
42 - 59 MPa
6000 - 8500 psi
Maximum Water Absorption
< 8% -
3.5 - 5.5%
4.9 - 7.7 lb/ft 3
Individual Average of 3
> 2000 kg/m 3 -
- >125 lb/ft 3
Density
2100 - 2250 kg/m 3
130 - 145 lb/ft 3
Based on CSA 165.2 for Grade I, Solid Units, Density over 2000 kg/m3 and ASTM C1634 for Normal Weight
45
STONE
Made with FlippingBook - PDF hosting