Origin Series
See notes below:
Legacy Collection
56
SIZES (D X H X L)
Turner Fleischer Architects
10cm Ashlar, Split 90 x 90 x 390 mm (3 1/2 x 3 1/2 x 15 3/8")
10cm Stretcher, Split 90 x 190 x 390 mm (3 1/2 x 7 1/2 x 15 3/8")
10cm Ashlar, Plain 90 x 90 x 390 mm (3 1/2 x 3 1/2 x 15 3/8")
10cm Stretcher, Plain 90 x 190 x 390 mm (3 1/2 x 7 1/2 x 15 3/8")
AVAILABLE STYLES: Plain, split-face, scored, 2 rib, 3 rib, 4 rib, 6 rib, split ledge, L-corners Available with Rainbloc ® upon request. See page 44 for more information.
Block: Origin Series, Canvas Beige, Split
OTHER SIZES AVAILABLE ( D X H X L)
Note: 1. C oncrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the block unit and of the masonry construction should be reviewed and verified. 2. C oncrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the NCMA TEK 10 series on movement control. 3. T o ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices. 4. Brampton Brick Limited is not design responsible.
90 x 90 x 290 mm (3 1/2 x 3 1/2 x 11 3/8”) Plain Only 90 x 90 x 590 mm (3 1/2 x 3 1/2 x 23 1/4”) Plain Only 90 x 190 x 590 mm (3 1/2 x 7 1/2 x 23 1/4” ) Plain Only 140 x 90 x 390 mm (5 1/2 x 3 1/2 x 15 3/8”) Plain Only
140 x 190 x 390 mm (5 1/2 x 7 1/2 x 15 3/8”) 190 x 90 x 390 mm (7 1/2 x 3 1/2 x 15 3/8”) Plain Only 190 x 190 x 390 mm (7 1/2 x 7 1/2 x 15 3/8”) 240 x 90 x 390 mm (9 1/2 x 3 1/2 x 15 3/8”) Plain Only 240 x 190 x 390 mm (9 1/2 x 7 1/2 x 15 3/8”)
290 x 90 x 390 mm (11 3/8 x 3 1/2 x 15 3/8”) Plain Only 290 x 190 x 390 mm
(11 3/8 x 7 1/2 x 15 3/8”) 90 x 190 x 190 x 390 mm (3 1/2 x 7 1/2 x 7 1/2 x 15 3/8”) Split Only
Typical Brampton Brick Range
PLAIN
SPLIT
Physical Property
CSA
ASTM
Metric Units Imperials Units Metric Units Imperials Units
Individual Average of 3 Specified Individual Average of 3
- - > 15 MPa
> 1800 psi > 2000 psi - < 15 lb/ft3 < 13 lb/ft3
Minimum Compressive Strength
18 - 23 MPa 2600 - 3350 psi
28 - 38 MPa 4000 - 5500 psi
< 175 kg/m 3 -
Maximum Water Absorption
125 - 160 kg/m 3
7.8 - 10.0 lb/ft³
95 - 110 kg/m³
5.9 - 6.9 lb/ft³
Individual Average of 3
> 2000 kg/m³ -
- > 125 lb/ft³
Density
2050 - 2150 kg/m³ 125 - 135 lb/ft³ 2150 - 2200 kg/m³ 130 - 140 lb/ft³
Based on CSA 165.1 for Third Facet “A” and ASTM C90 for Normal Weight
NON-STOCK PRODUCTS: Please be aware that these products are made to order as required. Minimum quantities and advance lead times must be considered to ensure your products arrive on time. Pricing can vary according to product colour, size, and finish. Contact your Brampton Brick Sales Representative to discuss your project requirements prior to specifying. For additional information, please visit our website at BramptonBrick.com .
59
BLOCK
Made with FlippingBook - PDF hosting