Architectural Masonry Product Guide Edition 6.2

Produced with RainBloc ® . See page 44 for more information.

Profile Series

Nueva ® Collection

56

SIZES (D X H X L)

Stantec Architecture Ltd.

10cm 90 x 590 90 x 90 x 590 mm (3 1/2 x 3 1/2 x 23 1/4")

10cm 190 x 590 90 x 190 x 590 mm (3 1/2 x 7 1/2 x 23 1/4")

10cm Ashlar 90 x 90 x 390 mm (3 1/2 x 3 1/2 x 15 3/8")

10cm Standard 90 x 190 x 390 mm (3 1/2 x 7 1/2 x 15 3/8")

Corner Stone 90 x 190 x 190 x 390 mm (3 1/2 x 7 1/2 x 7 1/2 x 15 3/8") (SOLID unit, not cored)

Block: Profile Series, Academy Black, Suave

OTHER SIZES AVAILABLE ( D X H X L)

240 x 90 x 390 mm (9 1/2 x 3 1/2 x 15 3/8”) 240 x 190 x 390 mm (9 1/2 x 7 1/2 x 15 3/8”) 290 x 90 x 390 mm (11 3/8 x 3 1/2 x 15 3/8”) 290 x 190 x 390 mm (11 3/8 x 7 1/2 x 15 3/8”)

Note: 1. Concrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the block unit and of the masonry construction should be reviewed and verified. 2. Concrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the NCMA TEK 10 series on movement control. 3. To ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices. 4. Brampton Brick Limited is not design responsible.

90 x 90 x 290 mm (3 1/2 x 3 1/2 x 11 3/8”) 140 x 90 x 390 mm (5 1/2 x 3 1/2 x 15 3/8” ) 140 x 190 x 390 mm (5 1/2 x 7 1/2 x 15 3/8”) 190 x 90 x 390 mm (7 1/2 x 3 1/2 x 15 3/8”) 190 x 190 x 390 mm (7 1/2 x 7 1/2 x 15 3/8”)

Typical Brampton Brick Range

Physical Property

CSA

ASTM

Metric Units

Imperial Units

Individual Average of 3 Specified Individual Average of 3

- - > 15 MPa

> 1800 psi > 2000 psi - < 15 lb/ft3 < 13 lb/ft3

Minimum Compressive Strength

18 - 23 MPa

2600 - 3350 psi

Maximum Water Absorption

< 175 kg/m 3 -

7.8 - 10.0 lb/ft³

125 - 160 kg/m 3

Individual Average of 3

> 2000 kg/m³ -

- > 125 lb/ft³

Density

2050 - 2150 kg/m³

125 - 135 lb/ft³

Based on CSA 165.1 for Third Facet “A” and ASTM C90 for Normal Weight

NON-STOCK PRODUCTS: Please be aware that these products are made to order as required. Minimum quantities and advance lead times must be considered to ensure your products arrive on time. Pricing can vary according to product colour, size, and finish. Contact your Brampton Brick Sales Representative to discuss your project requirements prior to specifying. For additional information, please visit our website at BramptonBrick.com .

61

BLOCK

Made with FlippingBook - PDF hosting