INDESTRUCTIBLE HANDLE HAMMERS
56 D
ATD-4094
Deliver a blow with minimum marring or surface damage DEAD BLOW HAMMERS and RUBBER MALLETS
ATD-4020 (SET)
ATD-4082 (SET)
ATD-4095
3 Pc. Dead Blow Hammer Set 8 oz., 1 lbs. and 2 lbs.
ATD-4096
ATD-4082
$47.69
B.A.M. ™
2 Pc. Rubber Mallet Set 16 oz. and 32 oz. mallets
$25.95
ATD-4020
Drop forged, polished steel heads that exceed ANSI specs FIBERGLASS HANDLE HAMMER SETS
5 Pc. Miscellaneous Hammer Set 16 oz. Ball Pein, 32 oz. Ball Pein, 3 lbs. Sledge, 3 lbs. Cross Pein and 32 oz. Rubber Mallet 5 Pc. Ball Pein Hammer Set 8 oz., 12 oz., 16 oz., 24 oz. znd 32 oz. Ball Pein Hammers
ATD-4045 (SET)
ATD-4045
$112.69
ATD-4047 ATD-4048 ATD-4063 ATD-4064 ATD-4076 ATD-4078 ATD-4079
$47.09 $74.09 $50.49 $50.19 $102.99 $106.29 $96.79
32 oz. Ball Pein Hammer - 14” Handle
48 oz. Ball Pein Hammer - 14” Handle
ATD-4035
$87.09
2.5 lbs. Cross Pein Hammer - 16” Handle
4 lbs. Sledge Hammer - 12” Handle
6 lbs. Sledge Hammer - 16” Handle
Features: Hardened tips; each piece marked with size; convenient roll pouch for storage 32 PC. TRANSFER PUNCH SET CNT-3S301B................ $71.49
8 lbs. Sledge Hammer - 12” Handle
8 lbs. Sledge Hammer - 16” Handle
Cutaway showing steel bars and locking plates
B.A.M. Trio Includes 32 oz. (4047), 2.5 lbs. (4063), and 4 lbs. (4064)
ATD-14033
$132.19
3 PC. X-LONG PIN PUNCH SET
3 PC. DEAD BLOW HAMMER SET • (1) 12 oz. Brass Hammer with brass non-sparking platted cap • (1) 1 lb. Ball Pein Hammer with steel plated cap • (1) 1/2 lb. Dead Blow Hammer • Shock absorbing steel shot filled canister for maximum force with reduced rebound
Four spring steel bars run all the way through the handle and are locked in the hammer head using steel locking plates. A special bonding process ensures that the head will never become dislodged from the handle. The ergonomic rubber grip handle absorbs vibration and reduces fatigue. *There are two spring steel bars in the ATD-4047 & ATD-4048 handles.
B.A.M. ™
$62.29 KAS-856-3ST
PUNCHES & CHISELS Forged chrome vanadium steel polished to a smooth finish and tempered for strength. All ATD punches and chisels are fully guaranteed against defective material and workmanship. Number Description
ATD-729
• 16” length for increases access to hard-to-reach areas • Pin diameter sizes: 1/4”, 5/16” and 3/8” • High carbon molybendum tool steel with striker cap
$45.29 TIT-63133
Includes
Price
$27.29 $28.19 $19.39 $22.19 $36.89
ATD-4075 ATD-759 ATD-761 ATD-762 ATD-760
3 Pc. Non-Sparking Brass Punch Set Pin: 1/4” x 4” and 3/8” x 6”; Drift: 1/2” x 8”
3 Pc. Long Taper Punch Set
Long Tapers: 3/16”, 1/4” and 5/16”
WLT-11109 (SET)
WLT-21236
5 Pc. Pin Punch Set
Pin: 1/8”, 5/32”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”
5 Pc. Roll Pin Punch Set
Roll Punches: 1/8”, 5/32”, 3/16”, 1/4” and 5/16”
8 Pc. Punch and Chisel Set
Pin: 1/8”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”; Cold Chisels: 1/2”, 5/8” & 3/4”
Pin: 3/16” x 3/8” x 6”, 1/8” x 3/8” x 5”, 3/32” x 3/8” x 5” and 1/4” x 1/2” x 6”; Center: 1/8” x 3/8” x 5”; Taper: 3/8” x 5/8” x 10”, 5/32” x 1/2” x 9”, 1/8” x 1/2” x 10” and 1/8” x 3/8” x 8-1/2”; Cold Chisels: 1/2”, 5/8”, 7/8” and 1” Pin: 3/32”, 1/8”, 5/32”, 3/16” 1/4” and 5/16”; Starter: 1/8”, 5/32”, 3/16”, 1/4” and 5/16”; Center: 1/4”, 3/8” and 1/2”; Flat Chisels: 1/4”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8” Pin: 3/32”–3/8”; Starter: 3/32”–5/16”; Cap Chisels: 1/4” and 5/16”; Center Punches: 1/4”–1/2”; Diamond Point Chisel: 5/16” and 3/8”; Half Round Nose Chisel: 5/16”; Flat Chisels: 1/4”–7/8” Center Punch 3/16-5mm x 5”; Cold Chisel 1/4-6mm x 5”; Cold Chisel 1/2-13mm x 6”; Cold Chisel 5/8-22mm x 6-1/2”; Cold Chisel 3/4-19mm x 7; Cold Chisel 3/8- 10mm x 5-1/2”; Line-Up Punch 1/8-3mm” x 7 7/8”; Pin Punch 3/32” x 4-1/2”; Pin Punch 1/8” x 4-3/4”; Pin Punch 5/32” x 5”; Pin Punch 3/16” x 5-1/4”; Pin Punch 1/4” x 5-3/4”; Solid Punch 1/8” x 5”; Solid Punch 3/16” x 5” Prick punch/ center punch tool, 3/16 pin punch/ hammer tool, and a cold chisel/ hammer tool
$43.19
ATD-714
14 Pc. Punch and Chisel Set
$56.39
ATD-720
20 Pc. Punch and Chisel Set
$74.79
ATD-729
29 Pc. Punch and Chisel Set
WLT-11111
WLT-11113
$103.89
MYT-61044
14 Pc. Punch and Chisel Set
Number
Description
Length
Material
Face Dia.
Price
B.A.S.H HAMMER KITS ® WLT-55830 8 lbs. BASH® Dead Blow Hammer WLT-55314 48 oz. BASH® Dead Blow Hammer WLT-55416 64 oz. BASH® Dead Blow Hammer WLT-20836 8 lbs. BASH® Sledge Hammer WLT-21236 12 lbs. BASH® Sledge Hammer WLT-55114 24 oz. BASH® Dead Blow Hammer WLT-55214 32 oz. BASH® Dead Blow Hammer
Call For Price Call For Price
38”
Rubber/Steel
3”
$34.95
MYT-89021
Hammerless 3 Pc. Set
38”
Rubber/Steel
3”
1-1/2” Call For Price 1-3/4” Call For Price 1-7/8” Call For Price 2-1/4” Call For Price 2-5/8” Call For Price
13-1/2”
Rubber/Steel
14”
Rubber/Steel
14”
Rubber/Steel
• Roll spring (pin) punches have a pilot point that fits into the hollow center of the pin • Taper punches with self-centering nose that aligns holes for accurate assembly • Pin punches with reverse taper eliminates sticking in work piece • All punches and chisels are forged from high-carbon molybdenum tool steel, individually heat-treated and hardened the entire length with a tempered striking end for durability
16-1/2”
Rubber/Steel
31-1/2”
Rubber/Steel
ATD-99803
ATD-99800
ATD-99802
Number
Description
Includes
Price
Call For Price
WLT-11111 3 Pc. BASH® Hammer Kit
Includes: 4 lbs., 12” BASH® Sledge Hammer, 32 oz., 14” BASH® Ball Pein Hammer and 2 lbs., 16” BASH® Cross Pein Hammer Includes: 2 lbs./14”; 3 lbs./14” and 4 lbs./16” BASH® Dead Blow Hammers Includes: 2-1/2 lbs./12” and 4 lbs./12” BASH® Sledge Hammers; 1-1/2 lbs./14” and 2 lbs./14” BASH® Dead Blow Hammers; 2 lbs./16” BASH® Cross Pein Hammer and 1-1/2 lbs./14” BASH® Ball Pein Hammer
$47.99
ATD-99800 5 Pc. Long Taper Punch Set
Long Tapers: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”
$30.29
ATD-99801 6 Pc. Precision Punch Set
Center Punch: 4-1/4”; Pin Punch: 1/16”, 5/64”, 3/32”, 1/8”; Solid Punch: 3/32”
Call For Price
WLT-11113 3 Pc. BASH® Dead Blow Hammer Kit
$33.19
ATD-99802 5 Pc. Punch and Chisel Set
Chisel: 3/8”, 5/8”; Center: 5”; Pin: 3/16”; Solid: 3/16”
Call For Price
WLT-11109 6 Pc. BASH® Master Hammer Set
ATD-99803 12 Pc. Roll Spring (Pin) Punch Set Roll Punches: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” $84.79 ATD-99804 6 Pc. Roll Spring (Pin) Punch Set Roll Punches: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” $44.19
Made with FlippingBook flipbook maker