Torque Rods and Replacement Bushings
■ Transverse Torque Rods are … Required for vehicles equipped with the following Hendrickson rear suspensions:
• AR2 ™ • COMFORT AIR ® • ROADMAAX ™
• HAS ™ • HAS ™ 40LH
• HN ® • HN ® FR • HAULMAAX ®
• PRIMAAX ® EX • FIREMAAX ® EX • ULTIMAAX ®
Transverse torque rods ARE NOT allowed to be used in conjunction with Hendrickson walking beam suspensions with bronze center bushings.
WHEN TRANSVERSE TORQUE RODS ARE USED ON HENDRICKSON WALKING BEAM SUSPENSIONS, EACH EQUALIZING BEAM MUST USE A RUBBER CENTER BUSHING. EQUALIZING BEAMS THAT CONTAIN A BRONZE CENTER BUSHING MUST BE CONVERTED TO A RUBBER CENTER BUSHING PRIOR TO INSTALLING TRANSVERSE TORQUE RODS. FAILURE TO DO SO CAN CAUSE PREMATURE COMPONENT WEAR AND/OR ADVERSE VEHICLE HANDLING. Also required for vehicles equipped with the following Hendrickson equalizing (walking) beam suspensions with rubber center bushings:
EQUALIZING BEAM LENGTH
Less than 60"
60" and Longer
R • RS • RT • RTE
44K – 52K
R • RS • RT
46K – 63K Capacity 85K – 120K
64" and Less
Longer than 64"
R•RS Required ★ Transverse torque rods ARE REQUIRED in all refuse, mining, and logging applications, although available for vehicles in other applications. ★ Recommended where it is necessary to restrict the lateral movement of the axles to prevent interference of the tires, brakes, axle housings, etc. with the frame, body, or suspension components.The proper clearance is deter- mined by the vehicle manufacturer prior to vehicle assembly.
Reference Lit. No. 45745-148 | 1-866-755-5968
Made with FlippingBook - professional solution for displaying marketing and sales documents online