TREX TRANSCEND ® COMPOSITE STAIR RAILING Installation Instructions
STAIR RAILING CONFIGURATIONS Note: See specific installation instructions for attachment of Trex Post Mounts or Trex Joist Mount Posts prior to installing any railing. Standard Crown Rail
Cutting post sleeves is NOT required. A. Post Sleeve (see page 1 for approved post sleeves) > For use with pressure-treated post, Trex Post Mount, or Trex Joist Mount Post (INSIDE MOUNT ONLY) B. Crown rail C. Universal bottom rail D. Balusters (must also use appropriate stair baluster spacer) See page 3 for “How to Install Standard Stair Railing”.
B
E
C
D
A
Continuous (Over the Post) Cocktail Rail
Post sleeves WILL NEED TO BE CUT. A. Pressure-treated post with Trex post sleeve NOTE: » Only for use with 4" x 4" (102 mm x 102 mm) post sleeve. » Trex post mounts cannot be used. B. T rex board top rail (1 x 6 or 2 x 6). NOTE: Enhance board cannot be used. C. Universal top rail D. Universal bottom rail E. Balusters (must also use appropriate stair baluster spacer) See page 7 for “How to Install Continuous (Over the Post) Cocktail Railing”.
POST SLEEVES WILL NEED TO BE CUT
C
B
E
D
A
Post-to-Post Cocktail Rail
Cutting post sleeves is NOT required. Ensure both top and bottom post/post sleeves are tall enough to accommodate top rail and 2 x 4. A. Post Sleeve (see page 1 for approved post sleeves) > For use with pressure-treated post, Trex Post Mount, or Trex Joist Mount Post (INSIDE MOUNT ONLY)
C
B
B. Trex 1 x 4 board C. Universal top rail D. Universal bottom rail
E
A
D
E. Balusters (must also use appropriate stair baluster spacer) See page 8 for “How to Install Post-to-Post Cocktail Railing”.
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TSR-0626
Made with FlippingBook - Share PDF online