TREX TRANSCEND ® COMPOSITE HORIZONTAL RAILING Installation Instructions
RAILING CONFIGURATIONS Note: See specific installation instructions for attachment of Trex Post Mounts or Trex Joist Mount Posts prior to installing any railing.
Standard Crown Rail
Cutting post sleeves is NOT required. A. P ost Sleeve (see page 1 for approved post sleeves) > For use with pressure-treated post, Trex Post Mount, or Trex Joist Mount Post (INSIDE MOUNT ONLY) B. Crown rail C. Universal bottom rail D. Balusters (must also use appropriate horizontal baluster spacer). See page 3 for “How to Install Standard Railing”.
B
A
D
C
Continuous (Over the Post) Cocktail Rail
Post sleeves WILL NEED TO BE CUT. A. P ressure-treated post with Trex post sleeve NOTE: » O nly for use with 4 x 4 post sleeve. » Trex post mounts cannot be used. B. Trex board (1 x 6 or 2 x 6). NOTE: » Enhance board cannot be used. C. Universal top rail D. Universal bottom rail E. Balusters (must also use appropriate horizontal baluster spacer). See page 5 for “How to Install Continuous (Over the Post) Cocktail Railing”. NOTE: Additional pan head screws will need to be purchased - see detailed instructions. POST SLEEVES WILL NEED TO BE CUT Cutting post sleeves is NOT required. A. Post Sleeve (see page 1 for approved post sleeves) > For use with pressure-treated post, Trex Post Mount, or Trex Joist Mount Post (INSIDE MOUNT ONLY) B. Trex 1 x 4 board C. Universal top rail D. Universal bottom rail E. Balusters (must also use appropriate horizontal baluster spacer). See page 6 for “How to Install Post-to-Post Cocktail Railing”. NOTE: Additional pan head screws will need to be purchased - see detailed instructions.
B
C
A
E
D
Post-to-Post Cocktail Rail
B
C
A
E
D
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
THR-0626
Made with FlippingBook - Share PDF online