Technical Details • 3m lengths • Blind or through milled groove 9mm wide and 10.5mm deep • Profile surface protrudes 0.85-1.0mm from groove • 0.7mm chamfer at 45° allows reduction in protrusion from the groove (from 0.8-1mm to 0.4-0.6mm) • Recessed LED micro profile with fumé grey diffuser gives refined dark finish when lights are off • Symmetrical light projection and no dot effect when lights are on • Profile section, with two micro protrusions, hides any irregularities in the groove edges (mouse-bite) • End caps match profile, ensure centring of light source and correct position and outlet of cable (end caps required only when not run full length) • Particularly suitable for use under shelves in wardrobes • SHE6B Pro ‘sliding’ LED strip (p.20-21) is the best light source option for Apex Dark • LED strip must be installed into Apex Dark profile before the profile is installed
Item Code Product Description
Length Installation Sales m Unit
DOM690
Apex Dark Profile
3
Recessed
Ea
DOM691
Apex Dark End Caps (required only when not run full length)
Pair
Sliding LED Strip for Use with APEX DARK – No Adhesive Backing
Apex Dark Off
Item Code Product Description
Length Watts
Light Tone
Sales
m
Unit
Apex Dark Cable Detail
DOM693
‘Sliding’ SHE6B pre-wired with double power cord ‘Sliding’ SHE6B pre-wired with double power cord
3
43.2W Natural
Ea
Note: Shown with end caps in place. End caps are not always required.
DOM692
3
43.2W Warm
Ea
Got Everything You Need?
Required Accessories
Page
Driver
47
Optional Accessories
Page
Sensor/Switching
38-45
Extension Cable
46
31
info@fit-nz.co.nz
www.fit-nz.co.nz
Fit NZ
fitnzhomestorage
fitnzhomestorage7406
fitnewzealand
09 4310025
Made with FlippingBook - Online catalogs