InfraRed Movement Sensors
IR 2.0 FC Sensor • 12Vdc and 24Vdc • Maximum load 24W at 12Vdc and 48W at 24Vdc • Comes with a 2000mm power cable, distributor block and Micro12 and Micro24 connectors • Can be surface mounted or recessed • Dual mode non-contact on/off switch and door switch • Must be connected in line between power supply and light fittings • Optical type sensor: for optimum performance avoid use of bright white, reflective or mirror type objects
Item Code Product Description
Sales Unit
Surface installation
DOM767
IR2.0 Dual Function Electronic Proximity Switch
Ea
Recessed installation
Watch the IR2.0 set-up demo
How IR 2.0 FC Works IR2.0 FC is a dual function electronic proximity switch for the control of all Domus Line 24Vdc LED lighting. It can be used as either a non-contact on/off switch or as a door switch, and it can be surface mounted or recessed into a 14mm diameter hole. In limit-switch setup IR 2.0 FC turns the luminaire on and off when the door is opened and closed. For perfect IR 2.0 FC operation, it is recommended not to use doors with reflective, brilliant or mirrored white surfaces. It is recommended to observe minimum and maximum distances from the door. These vary by finish: • 1mm min to 20-30mm max on dark
On-off switch set up (delivered as standard)
Proximity/door switch set up
• 1mm min to 80-100mm on bright white • 1mm min to 60-80mm max on natural
Surface installation
The IR 2.0 FC set up can be changed by pressing the microswitch for 3 seconds and then switching to the IR 2.0 SD setup in dimmer switch mode.
Built-in installation
Back edge of door
In-compartment
Press here to change function from on/off to dimming
41
info@fit-nz.co.nz
www.fit-nz.co.nz
Fit NZ
fitnzhomestorage
fitnzhomestorage7406
fitnewzealand
09 4310025
Made with FlippingBook - Online catalogs