SAL269
SAL267
Application of the release device to be recessed Drill a hole Ø 10mm and min. 40mm depth in the top,
Magnetic retaining catch to be inserted The retaining catch is itself magnetic and together with the magnetism of the release device DPM considerably increase (30%) the holding strength of the door against the cabinet side, thus avoiding accidental openings. For the installation it is necessary to drill a hole Ø 15mm and 11mm depth in the door. Depth adjustment from -0.5mm to +2.5mm.
the side or the base panel of the cabinet. Insert the release device into the hole.
SAL271
SAL270
Release device application with adaptor Insert the release device frontally into the adaptor. Place the adaptor to the top, the side or the base panel of the cabinet, using the drilling value of 8 + 16mm for final positioning.
Release device application with adaptor Insert the release device into the adaptor. Place the adaptor to the top, the side or base panel of the cabinet, using the drilling value of 37 x 32mm for final positioning.
197
info@fi -nz.co nz
www.fit-nz.co.nz
Fit NZ
fitnzhomestorage
fitnzhomestorage7406
fitnewzealand
09 4310025
Made with FlippingBook Ebook Creator