Explanatory Notes & Assembly Instructions
Simulation of the opening movement of a 110° hinge with full overlay door
Simulation of the opening movement of a 110° hinge with half overlay door
S = Thickness of the cabinet side D = Required door overlay T = Door thickness K = Drilling distance A = Reveal L = Gap between door and carcass
For hinges Series 200 and Silentia 700 Assembly with Domi snap-on mounting plates
Locate the lugs on the mounting plate into the recesses beneath the arm.
For inset door, L = gap between internal face of door and internal cabinet elements (e.g. shelves, drawers etc) H = Height of the mounting plate G = Hinge constant Whatever door overlay is required, you can select from our range the combination of both the type of hinge arm and the thickness of mounting plate necessary to solve your construction problem and avoid the need to stock too many different components.
Gently rotate the door in the direction shown.
Then press lightly on the end of the arm to secure the catch.
To remove the hinge from the mounting plate, press gently in the places shown by the arrows.
200
A l efforts made to ensure accuracy. Suppliers may change specs at short notice or we may make improvement to produc that may imp c pecs If you are ordering an item for the first time, please check our website for the latest version of this page (DOWNLOAD INFO button on the item’ age) or talk o us to ns re the av been no spec changes.
© Copyright 2025 All rights reserved
Made with FlippingBook Ebook Creator