Load Ratings
unit: mm
Total
Slide
Loading
Holes Position
Item Code
Length Travel Rating mm mm kg/pair A
B
C
D
E
F
G
H
I
J
KS45PS.300 KS45PS.350 KS45PS.400 KS45PS.450 KS45PS.500 KS45PS.550 KS45PS.600
300.0 350.0 400.0 450.0 500.0 550.0 600.0
305.0 351.0 403.0 452.0 509.0 563.0 605.0
27.0 34.0 45.0 45.0 45.0 45.0 39.0
– – – –
163.0 163.0 163.0 163.0 259.0 259.0 259.0
– – – –
277.0 327.0 355.0 355.0 451.0 451.0 451.0
– –
163.0 163.0 163.0 163.0 163.0 163.0 163.0
– – –
– – – – –
– – – – – – –
259.0 259.0 355.0 387.0 451.0 483.0
377.0 427.0 477.0 527.0 577.0
259.0 259.0 259.0 259.0
163.0 163.0 163.0
355.0
– –
387.0 387.0
515.0 *Tolerance:±0.5
Installation Instructions 1. Separate slide members by actuating disconnect mechanism. 2. Install the drawer members as indicated in Fig.1. Make sure both drawer members are vertically and horizontally parallel. 3. Install the cabinet members as indicated in Fig.2. Make sure both cabinet members are vertically and horizontally parallel. 4. Insert drawer members into cabinet members and push drawer until closed. Note: If rubber buffer is to be used, a distance of 5mm must be reserved for push-open actualisation.
Drawer Member
Fig. 1
Cabinet Member
Fig. 2
Watch the installation process
89
info@fit-nz.co.nz
www.fit-nz.co.nz
Fit NZ
fitnzhomestorage
fitnzhomestorage7406
fitnewzealand
09 4310025
Made with FlippingBook Ebook Creator