Spray Guns
Low Pressure Wash Down
Features: Low pressure gun with straight jet and adjustable cone from the trigger with adjustable screws to alter cone angle wideness from 0-60° Full body moulded casing with rubber extremities, making the gun shock proof when dropped Cover made of TPE Forprene, which is resistant to surface agents (acids, detergents, polar solvents & organic grease) Moulded plastic trigger, meaning no exposed parts that could be a burn hazard when using hot water to 90°C Available in traditional blue or red. Colour code your guns for hot and cold for maximum OH&S points Ergonomically designed, with low force trigger to reduce operator strain on wrist and elbow Colour Code your guns. For example, where you use hot and cold water, use a blue gun for cold water and a red gun for hot water or white for dairy
New - Pro Shower Head - RLD
ST3225 Industrial Foam & Rinsing Gun
Food Grade Wash Down Hose
Features : LTF - Low Trigger Force 90% reduced holding force and 40% reduced trigger force against usual market guns
Technical Features : Lever faucet with wide passages Jet blender for accurate rinsing Nickel plated passages
Specifications Max Pressure: 870 PSI Flow: 120 L/min Max Temperature: 100°C Inlet: 1/2” BSP F Swivel Outlet: 1/2” BSP F
Knob for use with hot water up to 60° Blender protected by shockproof rubber Clamp to lock lever in the open position Easy handling of opening and closing Inlet G 1/2 M - Flow 18 lt/min @ 5 Bar
Part #
Description
List
Part #
Description
List
Part #
Description
List
Wash Down Gun for over shoulder use
145 29.1200.00
$280 C
148 203 225 545
$488 A
165 BSW-02-100 100 Metre Roll
$488 A
Foodjet - Food Hose
BluFoam - Foam Hose
Resistant to animal & poultry fats. Suitable for: Oil, water in oil emulsions & water mixes with up to 50% detergent Interior - Synthetic, oil resistant rubber with tight textile meshwork Cover - Synthetic rubber. Particularly abrasion,oil & solar resisatnt Weatherproof & food safe
Designed for industrial foam cleaning application. Suitable for: Foam or pre-spraying hose in the food industry. Suits water and water/detergent mixes, capable of contact with liquid food products
PVC hose with 5 layers and a flush surface Reinforced wit a twofold textile meshwork Liquid food safe Pressure to 725 psi and temp. to 70°C Diameter 12 mm. Wall Thickness 5mm Supplied with 1/2” Stainless Male ends
Pressure to 1,150 psi and temp. to 150°C Diameter 12 mm. Wall Thickness 3.5 mm Supplied with 1/2” Stainless Male ends
Part #
Length Diameter Wall
Cover
List
Part #
Length Diameter Wall
Cover
List
148 490 046 010 9 10 m 1/2”
5 mm Blue
$372 B
148 475 046 610 9 10 m 1/2”
3.5 mm Blue
$246 B
148 490 046 015 9 15 m 1/2”
5 mm Blue
$466 A
148 475 046 615 9 15 m 1/2”
3.5 mm Blue
$346 B
148 490 046 020 9 20 m 1/2”
5 mm Blue
$541 B
148 475 046 620 9 20 m 1/2”
3.5 mm Blue
$549 B
148 490 046 030 9 30 m 1/2”
5 mm Blue
$773 B
148 475 046 630 9 30 m 1/2”
3.5 mm Blue
$852 B
148 490 046 040 9 40 m 1/2”
5 mm Blue
$994 B
148 475 046 640 9 40 m 1/2”
3.5 mm Blue
$1,012 B
148 303 60 35M 35 m no ends
5 mm Blue
$485 N
35 m no ends
3.5 mm Blue
148 303 70
100 m no ends
5 mm Blue
$2,388 B
148 303 70 75
70 m no ends
3.5 mm Blue
$poa C
148 303 60 120M 120 m no ends
5 mm Blue
$POA N
120 m no ends
3.5 mm Blue
148 303 60 145M 145 m no ends
5 mm Blue
$POA N
145 m no ends
3.5 mm Blue
148 303 60 175M 175 m no ends
5 mm Blue
$POA N
175 m no ends
3.5 mm Blue
148 303 60 180M 180 m no ends
5 mm Blue
$POA N
180 m no ends
3.5 mm Blue
Other ends
Other ends
165 04159708
Worm Drive Clamp to suit 1/2” Hose
$6 D
165 IHCSS18-32
Worm Drive Clamp to suit 1/2” Hose
$poa
165 Z06005-0808 Hose Barb-1/2” barb + 1/2” BSP F swivel (Brass)
$14 C
165 Z06005-0808 Hose Barb-1/2” barb + 1/2” BSP F swivel (Brass)
$14 C
165 Z06003-0808 Hose Barb-1/2” barb + 1/2” BSP M swivel Brass
$14 C
165 Z06003-0808 Hose Barb-1/2” barb + 1/2” BSP M swivel Brass
$14 C
145 30.6430.00
Hose Barb - 1/2” barb + 1/2” BSP M end Brass
$12 C
145 30.6430.00
Hose Barb - 1/2” barb + 1/2” BSP M end Brass
$12 C
165 1002.1180.00
Hose Barb - 1/2” barb + 1/2” BSP M end SS
$22 C
165 1002.1180.00
Hose Barb - 1/2” barb + 1/2” BSP M end SS
$22 C
BE Pressure Supply Pty Ltd - Price List 2025 August
454
Made with FlippingBook interactive PDF creator