WWW.MILWAUKEETOOL.EU
MILWAUKEETOOLEU
SYSTEM ATTACHMENTS - WET DIAMOND DRILLING
FIXTEC ™ SOLUTION WITH DUST EXTRACTION
Description
Tool reception
Core reception
Article Number
EAN Code
Fits DCM2-250C & DCM2-350C
Description
Fits DD3-152
Fits MXF DCD150 Article Number
EAN Code
Fixing kit. For exclusive use in concrete. Ø 16 mm drill bit is required to set the drop anchor
FIXTEC™ Clean Line Rotor (CLR)
M18 x 2.5
1 ¼˝ UNC
4932352172
4002395368242
4932399731 4002395363827
✔
✔
✔
Stud bolt, setting tool, wing nut, washer and 5 pcs M12 drop anchor
1 3 / 8 ˝ open ended spanner. For holding the motor output spindle while removing a core bit
49964705
045242222766
✔
32 mm ended spanner. For holding the motor output spindle while removing a core bit.
4931428009 4002395844791
✔
41 mm open ended spanner. For removing the core bit from the motor spindle.
4931428010 4002395844807
✔
✔
FIXTEC ™ SOLUTION WITHOUT DUST EXTRACTION
Fixtec release. Suitable for all diamond motors with 1 1 / 4 ˝ spindle reception. Prevents the core bit from locking itself too tight onto the machine spindle. The core bits can then be released and removed with minimum effort
4932352053 4002395367108
✔
✔
Description
Tool reception
Core reception
Article Number
EAN Code
1 1 /
4 ˝ female to
1 / 2 ˝ female adaptor: To enable the connection of
4932352627 4002395372850
✔
✔
<50 mm diamond core bits on a 1 1 /
4 ˝ machine spindle thread
M18 x 2.5
M16
4932399174
-MISSING-
1 1 / 4 ˝ female / male extention rod, length 300 mm
4932399724 4002395363759
✔
✔
✔
FIXTEC™ adaptor. Tool changing in seconds. No extra tool required
1 1 / 4 ˝ female / male extention rod, length 500 mm
4932399725 4002395363766
✔
✔
✔
Telescopic extention. Extension pole used to fix drill rig to the ground instead of anchor bolts. Maximum load of 500 kg and adjustable extension height from 1.8-2.9 m
11 mm Hex
M16
4932399220
4002395358342
4932399732 4002395363834
✔
✔
✔
Vacuum pump VP6: For fastening of the diamond drill rig on smooth and even surfaces. Suction capacity: 850 mbar. Max. vacuum pressure: 6 m³/h / 100 l/min. Rated voltage: 220-240 V
4932352094 4002395367474
✔
✔
✔
Vacuum plate. Replacement rubber seal 4931428665
4932352676 4002395373345
✔
GUIDE RODS FOR DIAMOND CORE DRILLS
WT 10 watertank. 10 liters capacity, steel, water tank with inside and outside polyester coating. Reliable brass pump with a max. pressure bar of 6 bar. 2.5 m hose with quick connection system fits direct to Milwaukee® diamond drills
Description
Article Number
EAN Code
4932399726 4002395363773
✔
✔
✔
Guide rod for DD2-160. Supplied with locking screw (4931622432). Re - quires allen key (4931616044) and SDS-plus pilot drill bit (Ø 8 x 160 mm, 4932307071)
4932399173
4002395357802
Water collection ring: For use with drill rig DR 152 T. For use with max. Ø 152 mm core bits
4932352677 4002395373352
Replacement rubber ring for DR 152 T
4932352678 4002395373369
Water collection ring: For use with drill rig DR 250 TV. For use with max. Ø 180 mm core bits
4932399727 4002395363780
✔
Replacement rubber ring for DR 250 TV
4932399729 4002395363803
✔
Water collection ring: For use with drill rig DR 350 T. For use with max. Ø 300 mm core bits
4932399728 4002395363797
Guide rod for DD3-152. Requires SDS-plus pilot drill bit (Ø 8 x 110 mm, 4932307070)
4932352679
4002395373376
Replacement rubber ring for DR 350 T
4932399730 4002395363810
Spacer block T = 50 mm. Needs to be mouted between drill rig and motor cores > 250 mm and max. 350 mm. Included in drill rig DR 350 T
4932399736 4002395363872
✔
Quick connection motor mounting plate. Included in both drill rigs DR 250 TV and DR 350 T
4932399733 4002395363841
✔
Water collection ring: For universal use with diamond drilling tools. For use with max. Ø 152 mm core bits
4932478073 4058546340063
✔
✔
✔
186
187
For further technical specifications, including noise and vibration data, please visit our website: www.milwaukeetool.eu
For further technical specifications, including noise and vibration data, please visit our website: www.milwaukeetool.eu
Made with FlippingBook Annual report