PRODUCT FOCUS
ENSURE YOU MAKE THE RIGHT CONNECTIONS WITH KLAUKE CRIMPING TOOLS... Compression cable lugs – be safe – use a system!
W hen you buy your cable lugs from the local wholesaler, how do you know if the crimping tool you have is compatible? A poorly crimped cable lug will cause an increase in joint resistance, creating heat and in the worst case, a fire. A hexagonal crimp form is now the preferred style for most installers but it’s very size specific to the diameter of the cable lug to create a perfect result (OD & ID). If the Cu tube size is smaller than that of the designed die, the crimp will not compress enough and if the Cu tube is too large, the crimp will create flash or ‘ears’ on the side of the connector. Often, the installer will file these off which reduces the amount of Cu in the lug and again, creates a high resistance
connection. All cable lugs can only be crimped properly when a suitable system is used. A correctly matched die will form a complete hexagon, without any flashing and in most cases imprints the die or cable size
reference in the outside of the barrel for inspection and QA purposes. To avoid such consequences, Klauke recommends using a crimping tool from the same manufacturer as the cable lug to ensure a matched system. In addition, the new range of crimping tools from Klauke have pressure monitoring built-in, which
ensures the correct force is applied by the compression tool – completing the system and ensuring a perfect connection every time. Be safe – use a crimping system. T: 0044 (0)1986 891 519 E: klauke-sales@emerson.com W: www.klauke.com
AVAILABLE AT
46 | IRELAND’S ELECTRICAL MAGAZINE
FOLLOW US ON:
www.elecmagazine.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online