Catalog Rugged Digital Networks Solutions RJ Field USB field

COMPLIANT ROHS N & BZ

USBF TV Transversally sealed receptacles

In some applications, a transversal sealing for the receptacle is a « must ». This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle below. In addition, the Sealed USBF TV has been successfully tested in very high vibration corresponding to airplane applications. Main characteristics n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Improved EMI protection n  Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n 2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) n USBF TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Environmental protection n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Shocks: IK06 ► weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43°C, 98% humidity n Temperature range: - 40°C / +85°C

Applications n Embedded computers n Data acquisition and transmission in harsh environment n Railways n Battelfield communication systems n Navy systems

Data transmission USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB

IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example : USBFTV 2S A 2 N 03 A

Receptacle Connection side view

Main key

USB insulation on the left

USB insulation on the right

Coding A

Coding B

Part number code Series USB Field TV

USBF TV

2PES

A

2

N

03

A

Shell Type 2S : square flange receptacle

2PES : square flange receptacle + backshell + plastic gland 2PEMS : square flange receptacle + backshell + metal gland 7S : jam nut receptacle 7PES : jam nut receptacle + backshell + plastic gland 7PEMS : jam nut receptacle + backshell + metal gland Coding " A " (Standard) or " B " Back terminations 2 : rugged USB cable ( see corresponding datasheet page 109 ) Shells plating N : nickel G : olive drab cadmium ZN : aluminium shell - black zinc nickel plating - ROHS compliant USB cable length

03 : 30 cm [11.81 inches] 05 : 50 cm [19.68 inches] 10 : 1 meter [39.37 inches] USB cable end A : standard USB-A plug OPEN : open cable (no connector) Examples:

- Olive drab cadmium square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2S G 03 A - Nickel jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PES N10 A

102

Made with FlippingBook - Online Brochure Maker