Catalog Rugged Digital Networks Solutions RJ Field USB field

COMPLIANT ROHS N, B & BZ

RJF Transversally sealed receptacles

In some applications, a transversal sealing for the receptacle is a « must ». This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle as shown on the picture.

Main characteristics n  Same as the RJF series. n A complete IP68 sealing of the receptacle (even with no plug or no protective cap mated) is added. n  Outside dimensions are the same as the standard RJF series.

Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Applications n Outdoor equipment n Airplanes equipment n Tactical radios n Shelters n Rugged computers n Data acquisition and transmission in harsh envi- ronments

IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory : use the codes A, B, C or D in the part number: see below .

Part number code Series RJF : MIL-DTL-26482 H bayonet Shell type 2S : sealed square flange receptacle 7S : sealed jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1 : female RJ45 1RA : right angle female RJ45 2 : RJ45 Cordset Shell material & finish

RJF

7S

A

2

G

03 100BTX

B : aluminium shell - black coating - ROHS compliant N : aluminium shell - nickel plating - ROHS compliant G : aluminium shell - olive drab cadmium plating Nota : for N, G, ZN, the inserts are metallized.

ZN : aluminium shell - black zinc nickel plating - ROHS compliant

Cordset length (For Receptacles with “2” Back Termination only) - Other lengths are available on demand 03 100 BTX : 0.3m [11.81 inches] 05 100 BTX : 0.5m [19.68 inches] 10 100 BTX : 1m [39.37 inches] 15 100 BTX : 1.5m [59.05 inches] xx OPEN : open cable - with no plug at the end ( xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples:

- bayonet, sealed jam nut receptacle, A coding, with female RJ45 back termination, olive drab cadmium plating: RJF 7SA 1 G - bayonet, sealed square flange receptacle, A coding, with female RJ45 back termination, black plating: RJF 2SA 1 B - bayonet, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating: RJF 7SA 2 G15 100BTX

22

Made with FlippingBook - Online Brochure Maker