COMPLIANT ROHS N, B & BZ
RJF Hermetic receptacles
In some applications, a transversal hermiticity for the receptacle is a « must ». This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle as shown on the picture. Helium leakage is less than 1.10 -6 cm 3 per second [0.1 micron cubic ft per hour] at one bar [15 psi] pressure differential. Main characteristics n Same as the RJF series. n A complete IP68 sealing of the receptacle (even with no plug or no protective cap mated) is added. n Outside dimensions are the same as the standard RJF series.
Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Applications n Outdoor equipment n Airplanes equipment n Tactical radios n Shelters n Rugged computers n Data acquisition and transmission in harsh environments
IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A, B, C or D in the part number: see below .
Part number code Series RJF : MIL-DTL-26482 H bayonet
Shell type 2H : transversally sealed and hermetic square flange receptacle 7H : transversally sealed and hermetic jam nut receptacle
Coding A,B,C,D Back terminations (for receptacles only) 1 : female RJ45 1RA : right angle female RJ45 2 : RJ45 Cordset Shell material & finish
B : aluminium shell - black coating - ROHS compliant N : aluminium shell - nickel plating - ROHS compliant G : aluminium shell - olive drab cadmium plating Nota : for N, G, ZN plating, the inserts are metallized.
ZN : aluminium shell - black zinc nickel plating - ROHS compliant
Cordset length (for receptacles with “2” back termination only) - Other lengths are available on demand 03 100 BTX : 0.3m [11.81 inches] 05 100 BTX : 0.5m [19.68 inches] 10 100 BTX : 1m [39.37 inches] 15 100 BTX : 1.5m [59.05 inches] xx OPEN : open cable - with no plug at the end ( xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples:
- bayonet, sealed jam nut receptacle, A coding, with female RJ45 Back termination, olive drab cadmium plating: RJF 7HA 1 G - bayonet, sealed square flange receptacle, A coding, with female RJ45 back termination, black plating: RJF 2HA 1 B - bayonet, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating : RJF 7HA 2 G15 100BTX
Made with FlippingBook - Online Brochure Maker