Catalog Rugged Digital Networks Solutions RJ Field USB field

RES-GMC-1M-FORC Military Ethernet Media Converter with Remote Control For fiber extension of existing systems on the Field Amphenol’s RES-GMC-1M-FORC is a MIL-STD rugged, unmanaged-military-grade Media converter, offering Gigabit communication. Developed for network deployment in harsh environment applications, the RES-GMC-1M-FORC series serves as a robust solution to extend your Tactical Gigabit Ethernet network over fiber. The fiber interface is a CTOS connector with expanded beam, designed for intensive use in severe environments. Combining the 2 units of RES-GMC-1M-FORC with a fiber drum, your network will be extended on the field and remote controlled from safe area through fiber optics. > Simply add 2 media converters unit 1 and unit 2 + a fiber drum Due to extreme low consumption of unit 2 in STANDBY mode, your battery on the field will operate longer.

Operation: • Connect the unit 1 to a command or control post in a safe area. • Install the unit 2 together with the deployed system directly on the field, powered by battery through DC IN. • Link the 2 units with an optical fiber harness. • The unit 2 is remote controlled by unit 1. Once unit 1 is powered, it will wake up the unit 2. • The deployed system will be powered from the battery, through DC OUT connector of the unit 2. • Up to 100A can be provided to the deployed system!

Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Combat vehicles Where your system can be extended through network.

Unit 1

Fiber drum

Key features n Ethernet ports n 10/100/1000 Base TX to 100/1000 Base SX-(MM) Media converter n Networking n Full wire-speed forwarding rate n Store-and-forward or Pass through mechanism n Auto MDI-II, MDI-X, FDX, HDX, Flow control n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Link loss forwarding mechanism n Connectors n MIL-D-38999 (Power & Ethernet signals) n Fiber connector type: CTOS 77 PC (2 fibers for Ethernet, 1 fiber for remote control) n Protective caps over each connector n Chassis n Low profile rugged aluminium extrusion

Unit 2

n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, semi-gloss n Color: sand mate n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68

56

Made with FlippingBook - Online Brochure Maker