Can be used with most the USB 3 .0 cordset brands : No tools required! Plug assembly 1. Insert the USB 3 cordset into the metallic backshell 2. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB 3 -A plug into this retention spacer 3. Insert the friction ring laterally to the cable 4. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug.Note at this step, the main key is used for polar- ization through the blue seal.
7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help
IMPORTANT NOTE The sealing is done by the blue seal.
USB3 cordset usable - Not provided
n Metallic caps
USBF TVC 2
Connector type 6 : plug 2 : square flange receptacle 7 : jam nut eceptacle Shells material & finish
N : aluminium shell - nickel - ROHS compliant G : aluminium shell - olive drab cadmium BZ : marine bronze shell - ROHS compliant ZN : aluminium shell - black zinc nickel plating - ROHS compliant
n Panel gasket for square flange receptacle Thickness: 0,8 mm [.031] P/n: JE15
Made with FlippingBook - Online Brochure Maker