Catalog Rugged Digital Networks Solutions RJ Field USB field


USB3F TV Hermetic receptacles

In some applications, a transversal hermiticity for the receptacle is a « must ». This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle. Helium leakage is less than 1.10 -6 cm 3 per second [0.1 micron cubit ft per hour] at one bar [15 psi] pressure differential. Main characteristics n Same as the USB3F TV (see page 76)... a complete IP68 sealing of the receptacle is added (even with no plug or no protective cap mated). n Outside dimensions are the same as the standard USB3F TV (USB-A). n Vibrations : the compounded version of the USBF TV has been tested in vibration following the NAS 1599 aeronautic specification (ambient tem- perature): 5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements.

Data transmission USB specification 3.0 Data rate: up to 5Gb/s for high speed USB Applications n Embedded computers n Data acquisition and transmission in harsh environment n Railways n Battelfield communication systems n Navy systems

IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example : USBF3TV 2H A 03 G ACROS

Coding A

Coding B

A coding

Main key

Main key

B coding

Same for jam nut receptacle.

Part number code Series USB3 Field TV

2 H






Shell type 2H : square flange receptacle 7H : jam nut receptacle Coding A or B USB cable length

03: 0.3 m [11.81 inches] 05: 0.5 m [19.68 inches] 10: 1 m [39.37 inches] 15: 1.5 m [59.05 inches] Shells material & finish

G : aluminium shell - olive drab cadmium plating N : aluminium shell - nickel plating - ROHS compliant ZN : aluminium shell - black zinc nickel plating - ROHS compliant Type of cable * ACROS: high reliability crossed USB3 cable with plug at the end ASTR: high reliability straight USB3 cable with plug at the end OPEN: high reliability cable open = no plug at the end

* IMPORTANT NOTE • for PC to PC application, use a “ CROS ” type of cable • for PC to peripheral application, use a “ STR ” type of cable See Configuration use on page 87

- square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 H B 05 N ACROS - jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, ODC plating: USB3F TV 7 H A 10 G ASTR - jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, ODC plating: USB3F TV 7 H B 03 G OPEN



Made with FlippingBook - Online Brochure Maker