Engineered and assembled in Silicon Valley, the Mountz TBX line of precision preset break-over wrenches ensures consistent process and quality control by providing operators with a break-over wrench that helps you support your quality control inspectors by empowering your workers to prevent assembly errors. Torque range suitable for low to higher torque applications. Designed to tighten diverse fasteners accurately, break-over wrenches inform their operator when the right torque is reached by deflecting on their built-in hinge. As a result, you can reduce defective products and rework related to over- and under-torque conditions. Their small size enables them to fit into areas with tight clearances, boosting productivity and project ROI. With interchangeable heads, Mountz break-over wrenches allow you to switch out heads for tricky fasteners and to get more use out of your existing tools. NOTE: Head interchangeability is intended for use during recalibration to allow reconfiguring tools for different applications. They are not intended to be interchanged as a regular part of a manufacturing process. TBX break-over wrenches have a calibration life of 4x ISO standards that is unmatched by any click wrench on the market to keep your tools out of the lab and on the production floor.
PRODUCT BROCHURE TBX PRESET PRECISION BREAK-OVER WRENCH
“HAND ME THE MOUNTZ!”
SAFEGUARDING AGAINST FASTENING FAILURES • Torque limiting wrench improves control of the tightening process • Reduces the risk of both over and under-tightening • Break-over mechanism provides a visual indicator of achieving torque setting • Interchangeable end fitting design—selectable head types and sizes • Calibration life 4x ISO standards • Unmatched quality you can count on Mountz TBX Preset Break-Over Wrench
QUALITY IS AT THE HEART OF EVERYTHING WE DO Relied on by leaders in communications, aviation, automotive, medical and electronic-all industries in which process control is critical.
2
Reliable break-over technology in the palm of your hand QUALITY TORQUE WRENCH DELIVERS CONFIDENCE AT EVERY TURN Engineered and assembled in Silicon Valley, the Mountz TBX line of precision preset break-over wrenches ensures consistent pro- cess and quality control. The wrench's repeatability, traceability, and precision safeguards against fastening failures. When under- or over-torquing puts your products at risk, Mountz break-over wrenches help support your quality control process by empowering an operator to prevent assembly errors. Designed to tighten various types of fasteners accurately, the break-over wrench informs the operator when the proper torque is reached by deflecting at the pivot point near the tool's end. The unique break-over mechanism gives an operator ample time to react once the target torque is achieved and stop applying additional force to the fastener. Our break-over technology increases the consistency of torque delivered and joint reliability. Execute fastening tasks with precision and repeatability Mountz TBX tools stay in calibration 4X longer than the most stringent industry standard (ISO 6789). The torque limiting wrench is engineered with a break-
over mechanism that enables manufacturers to achieve and main- tain process reliability. You can give Mountz TBX wrenches to any operator and have the confidence that he/she will deliver the correct torque, time after time.
3
Preset break-over torque wrench improves productivity Modern, effective preset torque wrenches improve productivity by consistently applying the correct torque value to each fastener. Preset break-over wrenches are ideal for fastening applications where operators repeat- edly assemble parts at the same torque setting. A preset wrench is similar to setting an alarm clock to signal the achievement of a selected time. The wrench is pre-set to the application’s required torque value. The tool breaks over, pro - viding a visual indicator once torque is achieved.
A preset wrench doesn’t have an external torque adjustment scale. These tools have an internal torque adjustment mechanism for setting the torque value and preset using a hex key and a torque analyzer. The locking mechanism prevents accidental torque setting changes. Once the tool is set, the wrench's end cap is sealed with a calibration sticker and ready to be used. However, if the preset torque value needs to be changed for a new fastening application, the flexible tool can easily be adjusted to a new preset torque value.
TBX-25 ESD TBX-12 ESD
TBX-25
TBX-12
4
PRODUCT OVERVIEW
FEATURE
WHAT IS IT?
ADVANTAGE
END USER BENEFIT
• ISO 6789-1:2017 calls for maximum of 5,000 torque applications • Limits the amount of torque applied • Break-over mechanism deflects at a pivot point near the tool’s end fitting • Internal mechanism prevents accidental torque setting changes • Internal torque adjustment mechanism • Non-graduated setting torque tool • Anodized aluminum end cap for all models
• Exceeds standards • Mountz 4x ISO standards: 20,000 cycles before re-calibration • Prevent fastening errors • Tool’s built-in hinge provides a visual indicator of achieving the torque setting • Avoids torque setting drift • Prevents incidental adjustments • Accurate and repeatable torque setting • Tool is set to a designated torque value • Correct torque value is consistently applied • Durable and doesn’t strip out like plastic
• Longer time on the production line • Reduces calibration budget and down time • Precision and repeatability • Mitigate under- or over- torquing events • Boost project ROI • Ensures fastening precision and accuracy • Reliable process control • Longer period before re-calibration • Enhance process reliability • Improve production quality • Increase productivity • Reduce scrap rates • Improve operator's efficiency • Reduce discomfort, fatigue, and risk of injury • Improve operator's efficiency • Reduce discomfort, fatigue, and risk of injury • Configure the head type and size per fastening application • Flexibility to replace and change • Custom design heads available upon request • Enables the tool to fit in restricted space applications
Cycles Before Calibration
Break-Over Technology
Locking Mechanism
Preset Tool
Metal End Cap
• Ergonomic handle
• Cushion, non-slip grip
Ergonomics
• The end fitting of the wrench allows different head types and sizes to be exchanged and attached
• Compatible for various applications from open end spanner, box end, flare end, hex key, or a ratchet head with a single wrench.
Interchangeable Heads
5
MOUNTZ TBX PRESET BREAK-OVER WRENCHES
TORQUE RANGES
MODEL
ITEM NO.
DRIVE SIZE
LENGTH
WEIGHT
BREAK
AMERICAN
S.I.
TBX-12
076815
21.2–106.2 lbf.in
2.4–12 N.m
Type A
6"
0.8 lbs
20° or 90°
TBX-12 ESD
076818
21.2–106.2 lbf.in
Type A
6"
20° or 90°
2.4–12 N.m
0.8 lbs
10.4"
20°
TBX-25
076816
44.3–221.3 lbf.in
5–25 N.m
Type B
1.6 lbs
TBX-25 ESD
076819
44.3–221.3 lbf.in
5–25 N.m
Type B
10.4"
1.6 lbs
20°
Designed and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789: 2017 (+/- 4% of setting). Tamper-proof internal adjustment. No external adjustment scale—must be preset using a torque analyzer.
T BX-12 ESD
TBX-25 ESD
TBX-25
TBX-12
6
Interchangeable heads for TBX-12 model type A end fitting
OPEN END HEADS
BOX END HEADS
AMERICAN
METRIC
AMERICAN
METRIC
SIZE
ITEM NO.
SIZE
ITEM NO.
SIZE
ITEM NO.
SIZE
ITEM NO.
7/32"
068625
7 mm
068631
3/16"
068605
6 mm
068615
1/4"
068606
7 mm
068616
1/4"
068626
8 mm
068632
5/16"
068607
8 mm
068617
5/16"
068627
9 mm
068633
3/8"
068608
9 mm
068618
3/8"
068628
10 mm
068634
7/16"
068609
10 mm
068619
7/16"
068629
11 mm
068635
1/2"
068610
11 mm
068620
068636
1/2"
068630
12 mm
9/16"
068611
12 mm
068621
–
–
13 mm
068637
5/8"
068612
13 mm
068622
11/16"
068613
14 mm
068623
3/4"
068614
15 mm
068624
HEX KEY HEADS
FIXED SQUARE DRIVE HEADS
RATCHET HEAD
AMERICAN
METRIC
AMERICAN
AMERICAN
SIZE
ITEM NO.
SIZE
ITEM NO.
SIZE
ITEM NO.
SIZE
ITEM NO.
1/16"
068639
1.5 mm
068648
1/4" Sq. Dr.
068655
1/4" Sq. Dr.
068599
5/64"
068640
2 mm
068649
3/8" Sq. Dr.
068656
3/32"
068641
2.5 mm
068651
7/64"
068642
3 mm
068652
1/8"
068643
4 mm
068653
9/64"
068644
5 mm
068654
5/32"
068645
–
–
BOX RATCHET HEAD
BLANK END HEAD
3/16"
068646
–
–
AMERICAN
SIZE
ITEM NO.
1/4"
068647
–
–
SIZE
ITEM NO.
Blank End
068603
1/4" Box End
068598
7
Interchangeable heads for TBX-25 model type B end fitting
OPEN END HEADS
BOX END HEADS
AMERICAN
METRIC
AMERICAN
METRIC
SIZE
ITEM NO.
SIZE
ITEM NO.
SIZE
ITEM NO.
SIZE
ITEM NO.
1/4 "
1/4"
068684
9 mm
068694
068657
7 mm
068673
5/16 "
5/16 "
068685
13 mm
068695
068658
8 mm
068674
3/8 "
3/8 "
068686
17 mm
068696
068659
9 mm
068675
7/16 "
7/16 "
068687
18 mm
068697
068660
10 mm
068676
1/2 "
1/2 "
068688
068661
11 mm
068677
–
–
9/16 "
9/16 "
068689
068662
12 mm
068678
–
–
5/8 "
5/8 "
068690
068663
13 mm
068679
–
–
11/16 "
3/4 "
068691
068664
14 mm
068680
–
–
3/4 "
7/8 "
068692
068665
17 mm
068681
–
–
13/16 "
15/16 "
068693
068666
19 mm
068682
–
–
7/8 "
068667
22 mm
068683
15/16 "
068668
–
–
1 "
068669
–
–
1 1/16 "
068670
–
–
1 1/8 "
068671
–
–
1 1/4 "
068672
–
–
RATCHET HEAD
BLANK END HEAD
AMERICAN
SIZE
ITEM NO.
SIZE
ITEM NO.
Blank End
068604
3/8 " Sq. Dr.
068698
1/2" Sq. Dr.
068699
8
At Mountz, we take great pride in knowing that our advanced torque tools will end up in the right hands.
9
ABOUT MOUNTZ Mountz, The Torque Tool Specialists ® , has been a leader in the torque tool industry for more than 55 years. Engineered in the Silicon Valley and serving the globe, Mountz focuses on delivering high-quality torque products, services, and solutions to ensure customers can always proceed with confidence. We are committed to forging a safer world through precision and accuracy, and by innovating every day.
SILICON VALLEY HEADQUARTERS AND SERVICE CENTER 1080 N. 11th St., San Jose, CA 95112 408-292-2214 / M–F 6am–5pm PST ALABAMA DISTRIBUTION AND SERVICE CENTER 19051 Underwood Road, Foley, AL 36535
INTERNATIONAL For inquiries outside of the USA, Canada, and Mexico, please contact: international@mountztorque.com Phone: +44 1428 741756
mountztorque.com
Copyright © 2021 Mountz Inc. All Rights Reserved. V1/092821
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10Made with FlippingBook Annual report maker