HawkEye Elite ® Alignment Systems Greater profit and productivity through innovation
w
Hunter's latest productivity features!
PATENTED Revolutionary adaptor design! % Faster setups! % No metal-to-metal contact! % No knob twisting!
PATENTED Superior
target design! % Lighter design! % Narrower profile! % Faster readings!
NEW Faster Caster!
Saves time, increases speed and reduces battery drain from brake light draw.
EXCLUSIVE New console design! Integrated storage and charging for popular accessories.* EXCLUSIVE QuickComp ™ ! Compensate all wheels and capture initial measurements in one motion.
PATENTED OPTIONAL Patented steering system reset integration! Reset computerized steering systems on a wide variety of vehicles with one simple tool. PATENTED High-resolution cameras! Four high-resolution cameras provide alignment measurements with pinpoint accuracy.
* Remote Indicator and Tread Depth tool sold separately.
QuickGrip ® wheel adaptors & three-dimensional targ
Hunter's patented QuickGrip ® adaptors and three- dimensional targets accelerate service with set-up times in seconds instead of minutes...
PATENTED Extremely Fast Installation
% Spring-loaded arms grip the tire % Thumb switch secures the clamp % Off-center clamping has no effect on accuracy
PATENTED Avoid Damage to Expensive Rims
% Grips tire, not rim % No metal-to-metal contact % Only protective ring contacts rim
PATENTED Less Weight
PATENTED Space-Efficient Profile % Approx. 228 mm (9 in.) profile
% Weighs only 2.7 kg (6 lbs.) % Nearly 50% lighter than previous designs
% Easy to work around % Great for narrow bays
gets
2011
2011
2012
NORTH AMERICAN AUTOMOTIVE TOOL AND EQUIPMENT TECHNOLOGY INNOVATION AWARD
PATENTED Quick-Change Arms
% Interchangeable arms cover
up to 940 mm (37 in.) assemblies % One arm fits approximately 90% of applications
PATENTED Deep-Wheel Extension
% Deep rims or protruding hubs, no problem % Standard accessory
PATENTED Wide-Angle Targets
PATENTED Low Maintenance % Shop-tough polymer structure withstands drops % No electronics, cables or calibration % Only occasional cleaning required
OPTIONAL
% Perform max steer procedure, as needed % Standard accessory
Previous setups used valuable shop time…
Conventional electronic-sensor system – 10-minute-plus procedure
% Chock wheels and lift vehicle
1
4
10
% Jack up front and rear of vehicle % Check air pressure and recall specs % Mount all 4 sensors, compensate each sensor, and remove pins % Lower rear and front of vehicle and jounce
ACTIVITY TRACKER
% Steer caster % Print results
4 6 246
10:05 Total
Older technology requires long set-up times…
Camera-sensor systems speed up the process
% Chock wheels and lift vehicle % Check air pressure and recall specs % Mount targets % Roll backward, then forward to compensate 10
1
4
% Remove pins % Steer caster % Print results 4:00 Total
ACTIVITY TRACKER
3 6 l83
Early camera technology improved efficiency…
…Today, present your results in just 70 seconds!
1
Hunter's HawkEye Elite ® and Premium RX Lift capture all readings and produce measurements in 70 seconds!
ACTIVITY TRACKER
trip around the vehicle
l 0 72
trips to the console total walking steps
Hunter's 70-second procedure % Chock wheels and raise lift to work height % Mount targets and set air pressure % Roll forward to compensate sensors % Scan VIN to recall specs and perform faster caster steer % Vehicle results print automatically 1:10 Total
Fast printouts in 70 seconds! Use detailed printouts featuring your company’s logo to sell more work.
FIA streamlines the entire alignment process. Communication links automate tasks once performed by the technician manually, eliminating time-consuming trips around the vehicle and to-and-from the console.
2
1
3
4
PATENTED RX Scissor Lift console % Raising the vehicle triggers the sensors to look for wheel targets % Control PowerSlide ® and Inflation Station settings on the lift console % Store CodeLink tool near the vehicle to save steps
1
AlignLights turn on automatically at alignment height
PATENTED WinAlign ® console
2
% Centralized control of entire system % Communicate directly with lift to set tire pressure and automatically operate turnplates and slipplates % Guide the technician through the alignment process
Measurements are taken automatically after the fourth target is installed
PATENTED PowerSlide ® system % Slipplates and turnplates automatically lock and unlock at appropriate times % No more struggles with lock pins
3
Auto-locking turnplates and slipplates save trips around the vehicle
PATENTED Inflation Station % Automatically inflate all four tires simultaneously % Record starting and final pressure % Hose recoils to keep work area clear
4
Software tracks before and after tire pressures for the customer's printout
Requires FIA lift. See RX or Four-Post lift brochures for details.
Hunter's Safety System Alignment: Over 100 million vehicles require Safety System Alignment… and growing!
Electronic Stability Control % Since 2009, Hunter has supported electronic steering system resets as required by the (OEM) % Several systems use
120
110
100
Steering Angle Sensor
90
80
70
60
50
40
30
electronic steering system output to determine the vehicle's travel direction
20
10
0 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2020 2019
Source: Hunter Engineering Company research
l
2
3
Simplified reset instructions replace confusing OEM procedures
One tool replaces multiple OEM scan tools
The only integrated, complete alignment procedure
CodeLink's patented integration “links” the vehicle OBD-II system to the aligner
to align safety system related sensors to the vehicle’s alignment geometry. CodeLink ® advantages: % Integrated with Hunter WinAlign ® systems % Simple instructions shown on aligner screen % Only one tool required % Wireless communication with aligner % Resets safety systems and other related sensors % Alignment printouts document reset
Adaptive Cruise Control Lane Departure Warning
Steering Angle Sensor Vehicle OBD-II System
Finishes the job right % No other reset tool matches CodeLink's patented integration with the alignment procedure % Guarantees precision with exact steering system sensor thresholds % Reduces errors that result in customer comebacks
Printed documentation confirms that steering system reset was completed properly
When it comes to award-winning software, WinAlign ® is unmatched!
The importance of software…
> The most extensive vehicle information database. > Vehicle-specific procedures
guide your technicians with step-by-step instructions.
Over 30 years of experience and the largest R&D department in the undercar industry bring you the most profitable and productive software on the market.
> Patented and award- winning power tools
complete the work accurately the first time, every time. > WinAlign maximizes profit and productivity in your alignment bay.
WinAlign maximizes profit and productivity in your alignment bay
Ordinary systems simply present alignment readings
Ordinary camera systems simply speed up these readings
NEW
New Faster Caster procedure!
WAIT
WAIT
% Eliminates wait times during caster measurement steering sequence % Saves time and increases speed % Reduces need for brake pedal depressor installation by 86% % Reduces battery drain from brake light power draw
WAIT
WAIT
Steer left, right and back to center
No more waiting for left, right, and center readings during caster measurement steering sequence
ExpressAlign ® Perform every alignment with a streamlined procedure. ExpressAlign analyzes each job and presents the optimal action sequence with the minimum steps required.
WinToe ® Ensure a straight steering wheel every time without repeated adjustments or using a steering wheel holder. A timesaver on nearly every alignment
Virtual View ® See your alignment job in 3-D using real-time 3-D graphics. Used by experts and novices alike. Every alignment can be shown in 3-D
Tools and Kits Database Save trips back and forth to the tool box. Hunter presents all of the tools and aftermarket correction kits needed for each alignment.
Control Arm Movement Monitor ® Cut adjustment times in half for front-shim, dual- cam or dual-slot vehicles. Step-by-step graphics let you get it right on the first try.
Wheel-Off Adjustment Speed the alignment process by making adjustments with the wheel removed.* Available when you need it
* For three-dimensional targets, both Wheel-Off Adjustment Kit and SCA Adaptor Kit 20-2664-1 is required.
Take your alignment business to the next level!
Perform body shop and specialty alignments…
PATENTED
Shim-Select ® II Eliminate confusing shim charts and tables. Shim Select II quickly calculates and displays the template you need for proper shim installation.
PATENTED
Suspension Body Dimension Audit Quickly screen vehicles to determine alignability and collision repair needs.
PATENTED
Automatic Bushing Calculator ® Calculate the proper bushing size and position adjustment without wasting time with a zero bushing.
Symmetry Angle Measurements Instantly access symmetry angles and setback for your body shop customers.
PATENTED
Live Ride Height Adjustment Measure and adjust ride height in real-time.
Enhance your point-of-sale performance Provide front-shop personnel with quick, convenient access to vehicle-specific undercar information to explain and sell service.
Help your customers make informed decisions!
WinAlign ® printouts help sell work Explain needed parts and repairs and show completed work to customers using detailed, color-coded printouts. Clear and detailed printouts help you communicate and build rapport with your customers and sell more alignments
PATENTED
Point & Click Inspection Photos 5,000+ vehicle-specific photos and illustrations to assist your shop % Show your customers their hidden repair needs % Guide your technicians to the proper inspection points % Extend your service and profit opportunities
WinAlign ® Video Library 400+ videos and animations cover all aspects of wheel alignment today. % Educate your customers % Find answers to unusual problems % Extend your service and profit opportunities % Strengthen technician competency
PATENTED
The latest specs available online Download, access and communicate alignment service information through the Internet.
Use your aligner to perform Quick Checks!
1
4
Use detailed printouts featuring your company’s logo to sell more work
% Total toe front and rear % Camber on all wheels % Tire wear indication % Identifies vehicles that require Safety System Alignment
OPTIONAL
OPTIONAL
20-2813-1 CodeLink* Retrieves emission codes. Wirelessly transfers important vehicle information to console.
20-2781-3 Battery Health* Tests battery to OEM specs. Sends results to console wirelessly in 10 seconds.
OPTIONAL
OPTIONAL
20-2782-1 Tire Tread Depth* Quick and easy tire wear check. Conditions transmitted to console automatically.
Quick Tread ® Creates a 3D model of the tire and can be easily added to existing Quick Check ® inspection systems.
*Requires WinAlign ® 14.1 software or higher in Quick Check ® mode.
Choose the right alignment console for your shop!
WinAlign WA600 Premium consoles
Processor
3.30 GHz Intel ® Core ™ i3
Memory
4 GB of DDR3 SDRAM
Hard drive 120.0 GB Solid State Drive (or greater)
DVD-RW/CD-RW combo drive
Standard
609 mm (24 in.) or 685 mm (27 in.) widescreen LCD 812 mm (32 in.) available on large console
Monitor class
Wired & wireless network module
Standard
Operating system
Windows 10 IoT Enterprise
Large console
Three-dimensional target (TD Target ™ ) support
Standard
Large console with drawers
Standard (with WA680 consoles)
Compact console with printer drawer
Standard (with WA670 consoles)
Console-top storage and charging station Standard (with mobile WA600 consoles)
Award-winning WinAlign ® software
Standard
PATENTED
Vehicle Info Database (30+ yrs)
Standard (2 years free updates)
PATENTED
Real-time specs delivered by web
WebSpecs ® (2 years standard)
PATENTED
PATENTED
Steering system reset (integrated)
Yes (with standard CodeLink ® )
Quick Check
Standard
Compact console
Live Ride Height adjustment
Optional
PATENTED
Fully Integrated Alignment
Yes (FIA-equipped lift required)
PATENTED
Vehicle inspection with photos
Optional
PATENTED
Tools & Kits
Videos and Photos
PATENTED
Equipment video help/assistance
Optional
PATENTED
ShopResults (via ShopResults.NET ® )
2 years standard
Wall-mount console
4,000+ photos, 1,600+ illustrations Optional 400+ videos & animations
PATENTED
Training and productivity aids
Remote Indicator sold separately. For product dimensions, weights and site requirements, please contact your local Hunter Sales Representative.
Choose the right sensor package for your shop!
PATENTED
PATENTED
EXCLUSIVE
Fixed-column configurations fit most service bay applications.
Motorized and manual movable-camera configurations provide a full range of vertical travel for additional lift height.
PATENTED
PATENTED
Wall- and ceiling-mount configurations are perfect when space is at a premium.
Cabinet-mounted configuration is mobile to service multiple alignment bays and provides a full range of travel for additional lift height.
PATENTED
PATENTED
EXCLUSIVE
EXCLUSIVE
Floor-mounted overhead configurations accommodate unique applications.
HawkEye Elite ® sensors (HE421) come equipped with QuickGrip ® adaptors and three-dimensional targets.
HawkEye Elite ® alignment sensor and adaptor specifications
No metal-to-metal contact with wheel
Standard
PATENTED
Weight of assembly
2.7 kg
Profile of assembly
228 mm
Installation time per wheel
5 seconds
Rolling compensation style
Forward
2,608 x 1,952 (pixels per camera) 20,000,000 (pixels total)
Camera resolution
Maximum track width
2032 mm
Maximum wheelbase
5334 mm
Distance to wall*
1676 - 2717 mm
Suggested distance*
2514 mm
Short-bay distance (see site info)*
1676 mm
S.A.I. and included angle
% %
Setback
Maximum steering angle**
Lock-To-Lock
Live ride height***
Optional
PATENTED
Wheelbase difference
% % % % % % % % % %
Track width difference
Tread width difference
Lateral offset
Rear setback
Axle offset
Suspension & Body Dimension Audit (SBDA)
PATENTED PATENTED PATENTED PATENTED
Body angle
Body wheel offset & setback
Body roll**
Way Up Way Out WinToe**
PATENTED PATENTED
%
Wheel-Off Adjustment
Optional
* Refer to site requirements for exact bay specifications.
** Requires optional wide-angle target extensions. *** Requires Ride Height targets.
Introduce your wheel alignment capabilities and educate your customers with great Point-of-Sale options from Hunter. Increase revenue with Hunter merchandising!
STANDARD Customized column cap Make your
Sell more alignments with clear and informative printouts
alignment bay stand out. Hunter's lighted sensor column cap
can be customized with your logo or shop name. (available for most sensor configurations)
Be sure to check out other Hunter literature for more quality products from Hunter Engineering.
11250 Hunter Drive, Bridgeton, MO 63044, USA Tel: +1-314-731-3020, Fax: +1-314-731-0132 Email: international@hunter.com
0320VHE Copyright © 2020, Hunter Engineering Company
Form 6230-TE-05, 03/20 Supersedes form 6230-TE-05, 08/18
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20Made with FlippingBook interactive PDF creator