TCX70 PRO TIRE CHANGER Powerful and Operator-Friendly
Center clamp wheel safety meets swing arm speed
Technician-friendly controls
12-30 inch rim diameters
Secure wheels with no damage
Dual bead roller system
Everything you need for standard tyre changing EQUIPPED AND EASY-TO-USE
The TCX70Pro tire changer comes equipped to handle virtually all common tire and wheel combinations.
Available in red or black
A NEW! HYBRID LEVERLESS TOOL HEAD – Lifts bead without use of levers and reduces wheel and tire damage risk. B NEW! TWO-POSITION PLATEN – Handles wide range of wheels, features damage-free clamping, and better accommodates wide and reverse wheels. C DIAMETER CONTROL – Operate all diameter functions from a single point and retains diameter until reset.
D BEAD PRESS ARM – Helps mount difficult tires and holds sidewalls into drop-center position.
G EASY-TO-USE CONTROLS – Simple, three joystick control including a quick indent control and automatic un-indent. Inflation, rotation and column swing operations are controlled by foot pedals.
E QUICK CLAMP – Damage-free design safely secures wheel through hub and speeds clamping process.
F MOUNT/DEMOUNT ROLLERS – Gently rolls bead from rim without rim contact and makes match- mounting capable.
H POWERFUL MOTOR AND DRIVE – Two-speed drive (7 or 17 rpm clockwise) and high-powered electric motor delivers over 880 Nm (650 ft-lbs.) of torque.
I WHEEL LIFT (popular optional add-on) – Provides a convenient ramp design to easily and safely lift large assemblies.
C
G
C
F
D
A
Upper roller swings out of way when not in use.
B
Lower roller
Convenient storage within operator’s reach
OPTIONAL
I
E
H
Make your tire service faster and easier ENHANCED FEATURES
Technician-friendly controls % Easy-to-operate, intuitive controls % Three joysticks and three foot pedals control virtually all tire changing operations
Inflation, rotation and column swing operations are controlled by foot pedals.
Roller indent One fluid motion controls demounting activities. Once bead-loosening roller is set under rim flange, push the joystick to the side to indent.
Diameter control Adjust rollers to the correct diameter from a single lever.
% Extended travel % Polymer winged head › Doesn’t require protective inserts › Reduces wheel damage risk › Wing feature keeps beads in position during mount NEW! Hybrid leverless tool head improves demount range and performance % Unique tilting lip › Keeps bead in position during demount › Rounded profile reduces tire damage risk % Ergonomic controls reduce operator fatigue
Swivel tool arms
Tool head % Swivels out of the way when raised % Resets to same rim automatically % Save space over tilt-back designs
Upper roller % Moves away to save time on standard wheel service % Provides clearance on tall reverse assemblies
Power and control at your fingertips ASSIST TOOLS MAKE THE DIFFERENCE
Quick Clamp % Safely secures wheel through hub % Speeds clamping process % Damage-free design
NEW! Two-position platen % Handles wide range of wheels % Damage-free clamping % Better accommodates wide and reverse wheels
Bead press arm Assists mounting and demounting difficult or heavy tires. Bead press is easily controlled at the push of a button.
Optional accessories
Wheel lift Easily and safely lift large assemblies using this convenient ramp design.
Blast inflator RP11-8-11100416
Clamp adaptor – RP11-8-11100417 Adds clamping capability for truck wheels with large center holes. Adds clamping height for high offset wide wheels.
Directs large blast of compressed air exactly where needed to seat the bead.
Flange plate kit options Ideal for plastic clad wheels or reverse wheels where maximum protection is needed. Two flange plate options below work with TCX70PRO.
Heavy-duty 20-3158-1
Standard-duty RP11-8-11100039
Match-mounting and bead massage Hunter’s center-clamp tire changers used with Road Force ® wheel balancers eliminate vibration problems, reduce comebacks, and increase customer satisfaction. During bead massage, rollers apply force to the tire walls, assisting proper bead seating and reducing vibration concerns.
The bead rollers safely hold the tire stationary while the rim is rotated to match- mount stiffest
point on tire to low spot on rim.
properly seated bead
t
a t
TCX70PRO SPECIFICATIONS Power requirements 208-230V, 16A, 50/60Hz, 1ph Air supply requirements 8-12 bar (115-175 psi) Mount / demount tool Hybrid leverless head Clamping type Center with Quick Clamp Bead loosening type Upper / lower roller Match-mounting capable Yes Rim diameter range 12-30 in. (305-762 mm) Tire diameter (max) 45 in. (1143 mm) Wheel width (max) 15 in. (381 mm) Drive 7 / 17 rpm clockwise, 7 rpm counter-clockwise Torque 880 Nm (650 ft-lbs.) Height 2135 mm (84 in.) Width 1425 mm (56 in.) Depth With wheel lift: 1675 mm (66 in.) Without wheel lift: 1400 mm (55 in.)
TCX70PRO-21U
TCX70PRO-21UBLK
Your Hunter distributor is ready to help Receive same- or next-day service Get a free quote or on-site demo Register for training courses General information and questions Contact your local distributor hunter.com/contact
Because of continuing technological advances, specifications, models and options are subject to change without notice.
11250 Hunter Drive, Bridgeton, MO 63044, USA Tel: 1-314-731-3020, Fax: 1-314-731-0132 Email: international@hunter.com
Copyright © 2024, Hunter Engineering Company 1224BH
Form CB08138-05, 12/24 Supersedes form CB08138-05, 07/23
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Made with FlippingBook - professional solution for displaying marketing and sales documents online