L2 2xL2 2xL3
CTOS 77 “jam nut” Receptacle – rear mount
L3
L1
D1
The jam nut receptacle has to be mounted on the vehicle panel or on a box, it provides the link between the inside electro optic device and the outside optical link. The jam nut receptacle is mated with the first plug of the outer link patchcord. Fixed by means of an hexagonal nut with possibility to be stopped using a brake wire. Front sealing ensured by an “O” ring. Electrical contact between panel receptacle and protective cap (for EMI,CEM protection when cap is on). Protective cap is attached to the receptacle by a stainless steel rope and ring.
2xL2 2xL3
CTOS 77P : Straight Backshell Receptacle for pigtail
2xL1
D1
L1
L2
L3
BACKSHELL MAIN USE : To be used inside a vehicle or on a box to connect CTOS receptacle to the electro-optic transceivers, in a protected area. This rear part provides an easy cross connect output. Each pigtail can be terminated with ST, SC, FC, duplex SC, duplex LC, MTRJ connectors. Pigtails tensile strength : 10 daN. (depending on cable performance).
L4
D1
D2
2xL1
f D1
f D2
SERIES
L1 L2L3 L4
L1
L2
L3
CTOS MM* CTOS SM**
23 13.6 82 29 49.9 28 23 13.6 90.5 38.7 49.9 28
L4
D1
L1
L2
L3
L4
D1
D2
SOCAPEX
BACKSHELL MAIN USE : To be used inside a vehicle or on a box to connect CTOS receptacle to the electro-optic transceivers, in a non protected area. Unsealed straight backshell to be used with 1 or 2 tactical cables (1,2 or 4 number of channels) inside a vehicle. The rear part is made of 2 half shells molded in aluminum alloy. Possibility to add a multi channel connector at the other cable end. Cable/receptacle tensile strength : 100 daN (depending on cable performance). CTOS 77C00 : Straight Backshell Receptacle for TACTICAL CABLE
D2
L1
L2
L3
L4
D1
SOCAPEX
D2
SERIES L1 L2 f D1 f D2 CTOS MM* 23 13.6 132 max 64.7 49.9 33 CTOS SM** 23 13.6 146 max 78.7 49.9 33 L3 L4
BACKSHELL MAIN USE : To be used inside and outside a vehicle to connect CTOS receptacle to the electro-optic transceivers, in a non protected and humid area. Straight backshell to be used with a 1, 2, 4 fibers tactical cables inside or outside a vehicle. The rear part is made of an aluminum alloy shell with a cable retention clamp. Complete front and rear sealing. Possibility to add a multi channel connector at the other cable end. Cable/receptacle tensile strength : 100 daN (depending on cable performance). PLANCHE CTOS CTOL 2_3 CTOS 77M00 : Sealed Straight Backshell Receptacle for Tactical Cable
L1
L2 L3
D1
D2
SERIES L1 L2 L3 Ø D1 Ø D2 CTOS MM* 23 13.6 83 49.9 39 CTOS SM** 23 13.6 97 49.9 39
L2 L3
L1
D1
* MM
: Multimode
** SM
: Singlemode
8
Made with FlippingBook - Online magazine maker