MT-30 Webasto’s MT-30 is ideal for testing smaller applications such as battery modules, fuel stacks, partial modules and smaller components. This system provides an economical solution for a variety of testing needs while occupying a small footprint in the laboratory. All Webasto power cycling systems are equipped with a real-time clock on the system’s control board that enables measurement of Ah and kWh during cycling.
Technical Specifications
MT-30
AC Voltage
3 Phase, 380, 440 and 480 VAC
AC Voltage Tolerance
+10%/-15%
AC Current Frequency
80, 73 and 67 Amps
60Hz ±2Hz (50Hz ±2Hz available)
Power Factor
>0.99
Harmonic Distortion
< 3% THD; IEEE 519 Compliant
Power efficiency DC Voltage Max DC Current Max DC Power Max
94% 120V
ChA ±330A. ChB ±170A
±30kW 0-35 °C 0-60 °C
Operating environment - temperature Storage environment - temperature Operating environment - Humidity
0-90% Noncondensing
Weight
1,320 lbs (599 kg)
Dimensions
34.5” W x 55” H x 36” D (87.6cm W x 140cm H x 91.4cm D)
Performance Data Control Interface / Output data sampling
Local Control / CAN 33ms / RS-232 100ms
Control Software Options
LabView; C++ and visual basic, Remote operation system (ROS)
Rise time voltage - step (0-330a)
21.08ms
Slew rate current
15.65A/ms
Operating Range Configuration
Voltage (Vdc) CH A +5 to +120 ‘CH B +5 to +120
Current (Adc)
Power (kW)
-330 to +330 -170 to +170 -500 to +500
-30 to +30 -20 to +20 -30 to +30
Independent
Parallel
+5 to +120
Accuracy & Resolution Measurement
Accuracy (±)
Resolution
Voltage
0.1% full scale 0.1% full scale
20mV 20mA
Current Independent (2 channels)
*Ask us about our power curves 13
evtestsystems.com
Made with FlippingBook Online newsletter