Victron Inverter / Chargers
MultiPlus Inverter / Chargers 230V A MultiPlus, plus ESS (Energy Storage System) functionality
The MultiPlus is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option. The MultiPlus is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. PowerControl and PowerAssist - Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.
Features: • Solar energy: AC power available even during a grid failure • Two AC Outputs • Virtually unlimited power thanks to parallel and three phase operation • On-site system configuring, monitoring and control • Remote configuring and monitoring
MultiPlus 230V
48/20k/250-100
PowerControl & PowerAssist
Yes
Transfer switch
100A 100A
Maximum AC input current
INVERTER
DC Input voltage range
38-60 V
Output voltage
230 VAC ± 2 % 50 Hz ± 0,1 %
Output frequency (1)
Cont. output power at 25 °C Cont. output power at 40 °C Cont. output power at 65 °C Max apparent feed-in power
20 kW 18 kW 14 kW 20 kW
Standard off-grid application Loads that should shut down when AC input power is not available can be connected to a second output (not shown). These loads will be taken into account by the PowerControl and PowerAss ist function in order to limit AC input current to a safe value when AC power is available.
Time limited output power (cold start)
21 kW 5 hour 25 kW 1 min
Peak power
Maximum efficiency
96%
CHARGER
AC Input voltage range AC Input frequency range Charge voltage 'absorption'
187-265 VAC 45 – 65 Hz
57,6 V 55,2 V 52,8 V
Charge voltage 'float'
Storage mode
GENERAL
Auxiliary output
Yes (50 A)
External AC current sensor (optional)
100 A
Programmable relay
Yes
Protection (2)
a - g
For parallel and three phase operation, remote monitoring and system integration
VE.Bus communication port
General purpose com. port
Yes, 2x
Maximum altitude
2000 m
ENCLOSURE
Material & Colour
Aluminium,
Grid parallel topology with MPPT solar charge controller The MultiPlus will use data from the external AC current sensor (must be ordered separately) or power meter to optimise self-consumption and, if required, to prevent grid feed. In case of a power outage, the MultiPlus will continue to supply the critical loads.
Colour
blue RAL 5012
Product category
IP20
Battery-connection
Four M8 bolts (2 plus and 2 minus)
230 VAC-connection
Bolts M6
Weight
80Kg
Dimensions (H x W x D)
616 x 422 x 357 mm
Veloris. The Battery Partner.
146
Made with FlippingBook interactive PDF creator